I have one complete empty 110 16 Chan 4 buss frame. It is in good shape. All wiring is intact but it is an empty frame. Does have all 4 vus complete with buffer circuits.
I have quite a few 110 a-30 output cards with Jensen transformers.
110 mother and daughter boards
Some of the 501 mother and daughter boards left. Some are already sold.
An entire output card set for a 501 console. These are the older triad magnetics transformers and can supply schematics for the output cards as well.
110/501 plastic conductive faders - believe these came out of a 501. They are plastic conductive ala p&g faders. Need to be cleaned up but seem to be fine. There is around 18 or so available.
Master section modules out of a 501. I have everything but the control room monitor module.
I have a few spare sos routing modules from a 501
I have approx 6 parts Im pres out of a 501. Most are missing various parts/have been picked through over the years but have the inductors and xfrms and switches pots etc.
I have spare patchbays from a 501
Entire meter bridge from 501 with all meters. Formica wood is rough but otherwise it's all there.
Cut down sidecar frame and rails etc for a small 16-18 channel 501. Can provide pics. Has armrest etc.
Probably have lots more lying around. If it's a 110 or a 501 part you are hunting for shoot me a text.
Thanks guys,
Nathan
5128884238
Auditronics Console Parts 110 and 501
Moderators: TapeOpLarry, tomb
-
- audio school
- Posts: 1
- Joined: Thu Jun 04, 2020 8:27 am
Re: Auditronics Console Parts 110 and 501
I'm looking for schematics for an Auditronics 110-8 "Grandson". Can anybody help?
Who is online
Users browsing this forum: No registered users and 114 guests