FA: ADR / Helios compressors, Schoeps M221, Neve 3415...

Locked
User avatar
echorec
gimme a little kick & snare
Posts: 93
Joined: Sun Sep 21, 2003 5:10 am
Location: Stockholm

FA: ADR / Helios compressors, Schoeps M221, Neve 3415...

Post by echorec » Fri Feb 11, 2005 3:30 pm


User avatar
lichthaus-media
pushin' record
Posts: 200
Joined: Wed Jun 11, 2003 4:50 pm
Location: Salt Lake City
Contact:

Re: FA: ADR / Helios compressors, Schoeps M221, Neve 3415...

Post by lichthaus-media » Fri Feb 11, 2005 3:54 pm

Just a note: The SSL EQs Echorec has for sale are from my console (they work great and so do the supplies). If a tapeop'er wins the auction, I'll assist you in getting them up and running. :D

Good luck.

-james
Hooray for everything.

User avatar
ulriggribbons
steve albini likes it
Posts: 398
Joined: Sun Oct 26, 2003 7:50 pm
Location: Seattle, WA

Re: FA: ADR / Helios compressors, Schoeps M221, Neve 3415...

Post by ulriggribbons » Fri Feb 11, 2005 10:01 pm

Any chance of getting a copy of the docs that you have for the F700? I've been hunting for them for months. I've got some partial info, but incomplete schematics.

And if the price don't shoot too high, I'm on them :D

Regards

ju

User avatar
echorec
gimme a little kick & snare
Posts: 93
Joined: Sun Sep 21, 2003 5:10 am
Location: Stockholm

Re: FA: ADR / Helios compressors, Schoeps M221, Neve 3415...

Post by echorec » Sat Feb 12, 2005 4:41 am

Thanks James! :)

Hi JU, which schematics do you have? I have only the "B" board.

User avatar
ulriggribbons
steve albini likes it
Posts: 398
Joined: Sun Oct 26, 2003 7:50 pm
Location: Seattle, WA

Re: FA: ADR / Helios compressors, Schoeps M221, Neve 3415...

Post by ulriggribbons » Sat Feb 12, 2005 10:04 am

Hey There,

I've got the power supply stabilization, the output stage, and the setup/calibration procedures, plus the gardner transformer datasheets (the original F700's used gardner transformers I believe) , and a top level hookup diagram (shows pinouts, etc., and is likely different than the Helios version).

Don't have the B board. Is the B board the compression circuit and input stage?

Regards

ju

Locked

Who is online

Users browsing this forum: No registered users and 11 guests