FS: Spring reverbs, misc, etc.

Locked
toothpastefordinner
buyin' a studio
Posts: 881
Joined: Wed May 07, 2003 6:48 pm
Location: ohio
Contact:

FS: Spring reverbs, misc, etc.

Post by toothpastefordinner » Thu May 15, 2003 5:06 pm

All this equipment is in good cosmetic shape and 100% working condition. This is pretty old stuff, so the finish isn't shiny and they have a little bit of rack rash... but look like they've been taken care of. Paypal preferred, email questions to spam@toothpastefordinner.com.

Biamp dual spring reverb. Has four-band EQ, spring drive, wet/dry mix, and output level controls. 1/4" inputs/outputs, both channels are independently controlled. This is the dual version of the MR-140 spring reverb- use this and have it in "stereo"! 2 rack spaces, includes power cord. $90 + shipping

Tapco 4400 reverb. A classic dual spring reverb, VU meters, built-in 4-band EQ, all the stuff works. 3 rack spaces, includes power cord. $90 + shipping

Send/return cabling. 12 2-meter cables, 4 1-meter cables, each cable has a TRS 1/4" on one end and two TS 1/4" on the other end. These are Teac cables, I think, and have been used (and labeled with Sharpie for channels 9-24 on a board), but are still in good shape. I rewired everything, and these are left over, great for someone with a 4-track, etc. $40 for the whole bundle of 16 cables or email if you just wanna few.

Still have the Fostex R-8 for $250, the Tascam TSR-8 for $750. (1/4" and 1/2" reel-to-reel tape machines, respectively; both are 8-tracks and work great.)


drew
spam@toothpastefordinner.com

toothpastefordinner
buyin' a studio
Posts: 881
Joined: Wed May 07, 2003 6:48 pm
Location: ohio
Contact:

Re: FS: Spring reverbs, misc, etc.

Post by toothpastefordinner » Tue May 20, 2003 6:58 pm

Tapco is sold, Biamp spring reverb still up for grabs...

drew
spam@toothpastefordinner.com

Locked

Who is online

Users browsing this forum: No registered users and 9 guests