Okay, this isn't exactly about recording, but I didn't know where to post. My brother has asked me to help him do some acoustics in his home theater, we're going to use wall panels, bass traps and RPG diffusors... my question is... can I use a different fabric on the panels and bass traps? He wants an art deco 20s look and we've found some fabric. It's pretty thin and what not but I don't know what kind of effect this will have on the panels themselves.
Any ideas would be great.
thanks,
musik
Acoustical Fabric
- musikman316
- suffering 'studio suck'
- Posts: 426
- Joined: Wed Feb 18, 2004 1:41 pm
- Location: Wichita, KS
- Contact:
-
- ghost haunting audio students
- Posts: 3307
- Joined: Wed May 07, 2003 2:11 pm
- Location: I have arrived... but where the hell am I?
Re: Acoustical Fabric
I think that what will count the most is what is behind the panels more than the cloth itself. Obviously there would be some differences between various types of cloth, and a thick chrushed velvet might absorb more than a thin muslin, and a tough vinyl might reflect some frequencies rather than absorbing - but those are three pretty extreme differences. The depth and density of the stuff behind the cloth will have the biggest effect so if that is somewhat consistent, let your brother choose the fabrics he likes best.
-Jeremy
-Jeremy
- nacho459
- re-cappin' neve
- Posts: 748
- Joined: Wed Jun 30, 2004 10:53 pm
- Location: Pasadena USA
- Contact:
Re: Acoustical Fabric
yeah, the cloth shouldn't make a ton of difference. Throw some over a speaker and see if it changes the sound much.
- musikman316
- suffering 'studio suck'
- Posts: 426
- Joined: Wed Feb 18, 2004 1:41 pm
- Location: Wichita, KS
- Contact:
Re: Acoustical Fabric
Thanks for the replies, I'll check the fabric over a speaker... a relatively simple idea, and sometimes it's the simplest things that we overlook.
later,
musik
later,
musik
Re: Acoustical Fabric
the only possible worry with the cloth is that it would reflect sound, and therefore defeat the purpose of the panels. but it would only reflect high freqs anyway, and you are probbably more concerned with low and mid freqs. anyhow, you can tell if it's "acoustically transparent" by blosing through it. if it offers no resistance, it's transparent, which is good for your purpose. if you can't blow thorugh it, then it will reflect some frequencies. which, again, might not be a problem for you.
Who is online
Users browsing this forum: No registered users and 115 guests