Pacific Pro Audio R-one Ribbon mic?
- ubertar
- ears didn't survive the freeze
- Posts: 3775
- Joined: Wed Feb 18, 2004 7:20 pm
- Location: mid-Atlantic US
- Contact:
Re: Pacific Pro Audio R-one Ribbon mic?
Is anyone keeping count of how many people are in for how many? (yeah, I would count but I don't want to right now)
I guess with shipping, we could make it easier and maybe cheaper if all the mics going to the same city went to one address, and people could pick them up. Lots of us here in NYC, and it seems there are some other tapeop hubs as well. If they all get shipped to one place from China, it should be where there are the most people that could pick them up instead of re-shipping; whether that's NY or LA or whatever. We should all split the shipping costs equally, regardless of where we are. But this should keep the reshipping costs to a minimum.
I guess with shipping, we could make it easier and maybe cheaper if all the mics going to the same city went to one address, and people could pick them up. Lots of us here in NYC, and it seems there are some other tapeop hubs as well. If they all get shipped to one place from China, it should be where there are the most people that could pick them up instead of re-shipping; whether that's NY or LA or whatever. We should all split the shipping costs equally, regardless of where we are. But this should keep the reshipping costs to a minimum.
- thecongostudio
- steve albini likes it
- Posts: 399
- Joined: Sun Jun 08, 2003 3:18 pm
- Location: Central MA
Re: Pacific Pro Audio R-one Ribbon mic?
I am down for 2 as well. Someone needs to organize this because this sounds like a huge thing for the tapeop community. Keep me posted!
- dubphaser
- pushin' record
- Posts: 233
- Joined: Thu May 08, 2003 11:19 am
- Location: Long Beach, CA
- Contact:
Re: Pacific Pro Audio R-one Ribbon mic?
Count me in for 2! Does anybody have contact info?
-
- ass engineer
- Posts: 42
- Joined: Fri May 09, 2003 12:49 pm
Re: Pacific Pro Audio R-one Ribbon mic?
I would like to be in on this also. For two of them.
Re: Pacific Pro Audio R-one Ribbon mic?
There's gotta be a way to organize this. It would be a bitch to distribute the 100 though, even if in 50 batches of 2 per. I'm in for one, but would push it to two if it were necessary. But how to do it?..
-
- buyin' gear
- Posts: 524
- Joined: Mon Feb 16, 2004 7:17 pm
- Location: Omaha
- Contact:
Re: Pacific Pro Audio R-one Ribbon mic?
I'd be in for two. Or am I too late?
Ian
Ian
Re: Pacific Pro Audio R-one Ribbon mic?
This is where I would start searching for the maker.
BEIJING 797 AUDIO CO., LTD
ADDRESS: NO 2 JIUXIANQIAO ST. CHAOYANG DC. BEIJING CHINA 100015
TEL.: 86-10-64385650
FAX.: 86-10-64386201
I'm not sure this is the corect company but it is the largest Chineese exporter of mics and if they don't make it I'm sure they know who does.
BEIJING 797 AUDIO CO., LTD
ADDRESS: NO 2 JIUXIANQIAO ST. CHAOYANG DC. BEIJING CHINA 100015
TEL.: 86-10-64385650
FAX.: 86-10-64386201
I'm not sure this is the corect company but it is the largest Chineese exporter of mics and if they don't make it I'm sure they know who does.
Re: Pacific Pro Audio R-one Ribbon mic?
I could probably whip up a quick web page database that could track who wants how many, what their shipping address is, and if they've paid. I could password protect it. But there's no way I could manage the whole project. If that sounds like it will help, I'll try to put something together. It'll be really sparse and simple, but will help whomever wants to organize this thing.
Fields for the DB:
- Name
- Tapeop Username
- Shipping Address
- Phone
- E-mail
- Amount Paid
- Quantity
- Ship Date
Anything else? We could pull a couple simple reports from this to assess total ordered, etc.
-Bret
Fields for the DB:
- Name
- Tapeop Username
- Shipping Address
- Phone
- Amount Paid
- Quantity
- Ship Date
Anything else? We could pull a couple simple reports from this to assess total ordered, etc.
-Bret
Re: Pacific Pro Audio R-one Ribbon mic?
Based on an article I just read from sound on sound at:http://www.warhogsaudioshop.com/index.a ... rodID=1459 if it isn't Beijing 797 it must be
Feilo
U.S. & Canada (English)
1-888-259-4968
Feilo
U.S. & Canada (English)
1-888-259-4968
Re: Pacific Pro Audio R-one Ribbon mic?
70dB is enough for my T-bone in all but the most extreme circumstances (distant ambience micing of quiet sources like picked nylon stringed guitar for instance).minmin wrote:but do you think that the 70db or so on the n72 will not be enough for the t-bone to open up properly?
But the quality of the transformer and build is such that noise from the microphone becomes the dominating (and diqualifying) factor above 70dB of applied gain anyway (compared to a quality ribbon like Royer). So there really isn't any point in more gain anyway. That might change if you do a transformer mod.
Last edited by Soundboy on Wed Jan 26, 2005 3:45 pm, edited 1 time in total.
Re: Pacific Pro Audio R-one Ribbon mic?
What else? Well, I'll take a stab and say it's got to be at least another $10 per unit for receipt (shipping) and distribution (shipping). I think it would be healthier to assume we would all be in for $80 a pop.workshed wrote:I could probably whip up a quick web page database that could track who wants how many, what their shipping address is, and if they've paid. I could password protect it. But there's no way I could manage the whole project. If that sounds like it will help, I'll try to put something together. It'll be really sparse and simple, but will help whomever wants to organize this thing.
Fields for the DB:
- Name
- Tapeop Username
- Shipping Address
- Phone
- Amount Paid
- Quantity
- Ship Date
Anything else? We could pull a couple simple reports from this to assess total ordered, etc.
-Bret
But how to protect the $7k while in escrow, etc? That is a tough one.
Re: Pacific Pro Audio R-one Ribbon mic?
Another suggestion that might be worth pursuing, and I'll preface by saying that I have no idea if it would actually work. But if we have this many people who would be willing to drop around $80 a peice on them, maybe it would be worth getting the list together of interested people and trying to make a mass one time purchase from PPA? Maybe we could work a deal with them for more than the $80 but way less than list. It would probably cost us more per mic, but we could possibly buy them direct and individually and not need one massive bankroll?
Now they are in business to sell these mic's at a certain price point and make money, but they could also gain a lot of good word of mouth if the mics deliver.
Now they are in business to sell these mic's at a certain price point and make money, but they could also gain a lot of good word of mouth if the mics deliver.
[Asked whether his shades are prescription or just to look cool]
Guy: Well, I am the drummer.
Guy: Well, I am the drummer.
- Don Shumai
- gimme a little kick & snare
- Posts: 82
- Joined: Thu Jun 26, 2003 6:41 am
- Location: the appetizer menu
- Contact:
Re: Pacific Pro Audio R-one Ribbon mic?
If this happens, I'll go for two at that price.
Re: Pacific Pro Audio R-one Ribbon mic?
I think I found them:
http://tinyurl.com/6du9b
They don't have it listed on their website though. I've sent them an e-mail asking about it.
http://tinyurl.com/6du9b
They don't have it listed on their website though. I've sent them an e-mail asking about it.
Who is online
Users browsing this forum: No registered users and 48 guests