(Disclaimer: This doesn't pertain to recording music or instruments but to a specialized subset of recording audio. If I should be posting this somewhere else ? either in another section of the Tape Op forum, or in another forum altogether ? please let me know and I'll move it. Thanks.)
I am attempting to record a new voicemail message (voice with music background) for my studio by playing it out of Pro Tools LE through a Digi 002 into a Gentner SPH10 analog telephone hybrid, which is plugged directly into one of the 002's outputs. All the messages that I'm recording come back sounding both too quiet AND distorted. I know there's going to be a certain amount of distortion in the recording no matter what, since it's coming over the phone, but there seems to be in particular an extra high-end ?sizzle? audible over the whole pre-recorded message that is different from what one hears when listening to regular recorded messages.
Here's what I have tried to address the problem:
- compressing / limiting the recording in PT
- bringing the volume up / down in PT
- cutting out all the highs above 10 kHz or so (I don't remember the exact frequency, I EQ'ed it to sound like it was coming from a telephone line )
- recording the message by holding a phone up to one of the studio monitors instead of playing out of PT
I googled the junk out of this a few weeks ago...found out from http://docs.voxeo.com/voicexml/2.0/fram ... ormats.htm that telephony uses 8 kHz, 8-bit audio, and that automated phone response systems typically store their messages as audio files at this bit and sample rate. I considered converting the recordings to 8 kHz / 8-bit before playing them into the Gentner, but it doesn't seem like that would make a difference because I am recording the message to the voicemail via the phone line, as opposed to uploading a file that the system would play back.
So I guess what I'm wondering is: is there some kind of ?trick? to playing a pre-recorded message into a voicemail system that someone here might know about?
Recording a Voicemail Message out of PT through Phone Patch
-
- carpal tunnel
- Posts: 1563
- Joined: Mon Mar 15, 2004 9:01 am
- Location: The Oldest Town in Texas
- Contact:
Just after posting that last comment, I thought of something. but the board went down so now that it's back up...Is the Gentner supposed to have another Gentner on the other end to work properly? I don't know if that's how they work or not, but it seems like common sense that that type system would probably not work right single ended.
Aiit... this isn't a simple solution but many of us phone geeks use our own PBXs at home. Using a $60 old P3 desktop, a $40 analog telephony card, and a free linux distro of asterisk ( http://www.trixbox.org/ ) a world of voicemail possibilities opens up to you. I recently went to the eTel 2007 conference and heard the director of architecture at MySQL talk about the system he put in place for telemarketers... when a telemarketer calls he press *45 which fires an audio file of a SCREAMING monkey to the shocked telemarketer. The system them logs the callerID so everytime a call comes from that source the same audio file is played. Fargin' awesome. You can stream audio files as hold music, create a text to speech / speech recognition verion of Zork as a game for people on hold, interface any hardware in your house with your phone, etc, etc...
asterisk.org
asterisk.org
Who is online
Users browsing this forum: No registered users and 71 guests