Recording bass through my Bassman 50
Recording bass through my Bassman 50
My guitar amp is an early 70's Bassman 50 head with an old ampeg 2x12 cab with new greenbacks in it (25w each). I've used this setup from time to time while recording bass, but I've never turned it up too loud in fear that I'd damage the speakers. Lately I've been dying to hear what it sounds like if I turned it up. Will I likely smoke my speakers? What should I look out for? I don't know what the cab is rated for. My friend who's an electrician installed the speakers for me and used his own wiring, etc. Any tips would be appreciated.
call me rabbit fighter
Just turn it slowly a little bit at a time, play easy. If you hear real bad distortion like the speaker is bottoming out and whacking the frame, back off, you just found your limit.
Should be ok. That amp isn't super powerful. Also the pickups and your playing style will be a factor.
Active pickups and hard picking for example will put out a lot more signal than passive pickups with fingers.
If you blow your speakers its not the end of the world. They can be re-coned and made new again. (not that you want to incur that kind of expense of course....but you don't have to buy new speakers).
The 25 watt greenbacks are supposed to break up a little bit, that's the whole idea.
Should be ok. That amp isn't super powerful. Also the pickups and your playing style will be a factor.
Active pickups and hard picking for example will put out a lot more signal than passive pickups with fingers.
If you blow your speakers its not the end of the world. They can be re-coned and made new again. (not that you want to incur that kind of expense of course....but you don't have to buy new speakers).
The 25 watt greenbacks are supposed to break up a little bit, that's the whole idea.
damn
I hit send by accident
was going to say that sounds like a nice little set-up and that bass should sound pretty cool as long as you keep it reasonably low.
(unless you like a distorted bass sound)
I love older Fender amps.
non-master volume and before.
I had a Bassman 10 that worked way better on guitar than bass, but I suffered through many bands with it back in my early playing days. It had a really crappy glue job on one of the speakers that the previous owner did. Sounded cool, but just never loud enough.
I hit send by accident
was going to say that sounds like a nice little set-up and that bass should sound pretty cool as long as you keep it reasonably low.
(unless you like a distorted bass sound)
I love older Fender amps.
non-master volume and before.
I had a Bassman 10 that worked way better on guitar than bass, but I suffered through many bands with it back in my early playing days. It had a really crappy glue job on one of the speakers that the previous owner did. Sounded cool, but just never loud enough.
-
- alignin' 24-trk
- Posts: 68
- Joined: Fri Nov 18, 2005 6:40 am
- thunderboy
- buyin' a studio
- Posts: 993
- Joined: Wed May 07, 2003 11:53 am
- Location: ROC, NY, USA
Who is online
Users browsing this forum: kslight and 70 guests