FS: Otari MX5050 2 track 1/4" with extras

*Gear*ed towards individuals who are buying/selling - NOT a place for businesses to post their goods for sale.

Moderators: TapeOpLarry, tomb

Post Reply
lanxe
gettin' sounds
Posts: 121
Joined: Wed Feb 25, 2004 11:59 am
Location: carson city
Contact:

FS: Otari MX5050 2 track 1/4" with extras

Post by lanxe » Thu Dec 13, 2007 8:12 am

i posted this on reno's craigslist, but i thought i would offer it up here for those in northern california or northern nevada. (too expensive to ship two machines and the stand and the tape).

I have an Otari MX5050 B3 1/4" tape machine. I used it as a 2 track mixdown deck but havent used it much since the last project.

the heads show some wear (i can take a picture if you are interested). the pots are a bit scratchy, but the unit is very functional.

it also comes with all of these extras:
-A heavy duty roll around stand as shown in the picture
-A blue take up reel as shown in the picture
-a spare parts machine complete with motors, tape heads (full track), vu meters, one hub, transport, almost everything needed
-approx 6 new reels of quantegy 1/4 tape including the reels (about 3 are the smaller 7" reels the others are the larger reels)


I am asking $300 for all of this. i dont have a demag or alignment/calibration tape for it.

email me with questions at: pickleinn (AT) gmail (DOT) com

lanxe
gettin' sounds
Posts: 121
Joined: Wed Feb 25, 2004 11:59 am
Location: carson city
Contact:

Post by lanxe » Mon Dec 17, 2007 8:04 am

bump! i will give it to a tapeopper for 250.

Ryan

lanxe
gettin' sounds
Posts: 121
Joined: Wed Feb 25, 2004 11:59 am
Location: carson city
Contact:

Post by lanxe » Wed Jan 23, 2008 8:18 am

here it is:

Image

and here is the parts machine:

Image

Post Reply

Who is online

Users browsing this forum: No registered users and 46 guests