Mic'ing a Bass with a Condensor
- deadair
- steve albini likes it
- Posts: 320
- Joined: Wed May 07, 2003 7:54 am
- Location: Western Mass
- Contact:
Mic'ing a Bass with a Condensor
For some reason i never tried it until this past week..... sounded awesome! at3035 about 8-12" away from the cab. I tried blending the sound with a 421 right on the speaker, but no matter how much a moved it I couldnt get it to be in phase. I had assumed that with the distance that wouldnt be a problem, but i guess i was wrong. Either way i just went with the 3035 track and sounds great, so i'm not bummed, sure would have been handy to have one of those in-between-phase boxes though...... do others find it hard to get phase to work out when blending to mics on an instrument like this?
I use a mixture
Of a DI and a condenser a few feet away from a guitar amp.
When I first stared recording I would just go direct by itself and that worked out alright, but it lacked a lot of the presence and the string noise that I wanted for cetain tracks.
I found that miking a guitar amp in conjunction with the DI gave me the desired presence and string noise I was looking for, but also rounded out the low end and generally made things a lot thicker. A pleasant surprise...
Browsing the various recording fourms out there, I have learned that a lot of folks record bass in similar ways.
When I first stared recording I would just go direct by itself and that worked out alright, but it lacked a lot of the presence and the string noise that I wanted for cetain tracks.
I found that miking a guitar amp in conjunction with the DI gave me the desired presence and string noise I was looking for, but also rounded out the low end and generally made things a lot thicker. A pleasant surprise...
Browsing the various recording fourms out there, I have learned that a lot of folks record bass in similar ways.
- trodden
- on a wing and a prayer
- Posts: 5697
- Joined: Wed May 07, 2003 8:21 am
- Location: C-attle
- Contact:
Re: Mic'ing a Bass with a Condensor
last session, two bass band. One set up was a CAD E-100 (condensor) along with a 421. great!!!! and the other rig was miced with a RE-20 and a beyer soundstar (421 lookin mic). best bass i've gotten.
- Russian Recording
- re-cappin' neve
- Posts: 752
- Joined: Wed May 21, 2003 2:28 pm
- Location: Bloomington, IN
- Contact:
Re: Mic'ing a Bass with a Condensor
deadair...deadair wrote: I tried blending the sound with a 421 right on the speaker, but no matter how much a moved it I couldnt get it to be in phase. I had assumed that with the distance that wouldnt be a problem, but i guess i was wrong. ...... do others find it hard to get phase to work out when blending to mics on an instrument like this?
If you put two mics on the same source, but at different distances from the source, you are most likely going to get phase issues, especially on a bass cab. The problem is that the "soundwave" coming from the speaker reaches the two microphones at a different time, so that the further mic is actually delayed from the close mic. This slight delay causes phase cancelations. Since bass wavelenghts are so large, a slight time delay casues very noticeable and extreme phase cancelation. When you put the two mics at the same distance from the speaker, you will find that your phase problems will be greatly reduced. If you are using computer based recording/editing software, and you are recording each mic to a seperate channel. you can time-align the two channels so that the crests and peaks of the waveform are aligned down to the sample. You can also fix your problem with a digital mixer by simply delaying the close microphone so that it is coherent with the further mic. If recording analog, and you have an accurate digital delay, you can simply run out of the mic-pre your close mic is plugged into, and run it into your delay box. Set the appropriate delay with your ears or by the distance/time formula and send your signal straight to tape.
I hope this helps,
mike
Re: Mic'ing a Bass with a Condensor
the current recording im working on, i used an audio technica 4033 on bass. that was the 3rd choice after using and not liking the d112, then senn 421. it gave a lot better definition that the dynamics. also, i've seen a shure sm81 used nicely - they apparantly have a ruler flat freq response down to like 50hz.
i remeber reading long ago that bob weston fancied the 4033 on bass guitar - and this current recording is the first time it worked for me.
i remeber reading long ago that bob weston fancied the 4033 on bass guitar - and this current recording is the first time it worked for me.
-
- steve albini likes it
- Posts: 370
- Joined: Wed May 07, 2003 6:37 am
- Location: Austin, Texas
Re: Mic'ing a Bass with a Condensor
That AT 4033 is a peach on bass. My favorite. I've used it on little, tiny quiet amps, and big fat loud amps. It just has eggs.
I usually will try a ribbon 2nd, but I sure love 57's on loud bass amps, too.
brian
I usually will try a ribbon 2nd, but I sure love 57's on loud bass amps, too.
brian
- Russian Recording
- re-cappin' neve
- Posts: 752
- Joined: Wed May 21, 2003 2:28 pm
- Location: Bloomington, IN
- Contact:
Re: Mic'ing a Bass with a Condensor
Ill second the ribbon on the bass. I used an RCA BK-5 with huge success. I had to keep the volume pretty low, but it sounded great.
Beyer M88s sound good as well. I've seen the 4033 used by Mr. Albini as well as the 4031. Both sounded pretty great. The 4031 really pulled off the edgy overdriven bass thing while providing a ton of low end.
mike
Beyer M88s sound good as well. I've seen the 4033 used by Mr. Albini as well as the 4031. Both sounded pretty great. The 4031 really pulled off the edgy overdriven bass thing while providing a ton of low end.
mike
- wayne kerr
- ears didn't survive the freeze
- Posts: 3873
- Joined: Thu May 08, 2003 10:11 am
Re: Mic'ing a Bass with a Condensor
My two favorite bass rig mics -
47FET
Blue Mouse
Not necessarilly in that order, it just depends on which oen I like better with whatever rig I've got to work with.
Both deliver seriously big bottom without a lot of rumble and midrange detail til tuesday! I usually mult 'em and run one track through a RAT and a Distressor (set for "obliterate") and then blend the two signals til its just the right amount jangle with the fat fuzz... sorry to use those technical terms!
Speaking of EL, anyone here used a Phatso? I have yet to get my hands on one and would love some opinions.
PS - used a Mouse on Mike Watt's upright for an upcoming Li'l Pit release, and it's just fabuloso - I wish you all could hear it!
E
47FET
Blue Mouse
Not necessarilly in that order, it just depends on which oen I like better with whatever rig I've got to work with.
Both deliver seriously big bottom without a lot of rumble and midrange detail til tuesday! I usually mult 'em and run one track through a RAT and a Distressor (set for "obliterate") and then blend the two signals til its just the right amount jangle with the fat fuzz... sorry to use those technical terms!
Speaking of EL, anyone here used a Phatso? I have yet to get my hands on one and would love some opinions.
PS - used a Mouse on Mike Watt's upright for an upcoming Li'l Pit release, and it's just fabuloso - I wish you all could hear it!
E
The Edge... there is no honest way to explain it because the only people who really know where it is are the ones who have gone over.
-Hunter S. Thompson
-Hunter S. Thompson
- DeafinONEear
- steve albini likes it
- Posts: 373
- Joined: Fri May 02, 2003 12:24 pm
- Location: San Francisco
Re: Mic'ing a Bass with a Condensor
you didn't put a ribbon on the poll....
is this upright or electric?
if upright, m160 sounds yuuuuuummmmy.
arrrrrrrgh.
is this upright or electric?
if upright, m160 sounds yuuuuuummmmy.
arrrrrrrgh.
- Russian Recording
- re-cappin' neve
- Posts: 752
- Joined: Wed May 21, 2003 2:28 pm
- Location: Bloomington, IN
- Contact:
Re: Mic'ing a Bass with a Condensor
yes, ive used a mouse on an upright and it sounds phenomenal. Acrually i used it in conjunction with a Beyer M500. super nice. Do you have the transformerless Mouse or the Transformer Mouse? I used the one with the transormer (black) and supposedly there is a noticeable differance b/w the two.
mike
mike
-
- audio school graduate
- Posts: 23
- Joined: Wed May 07, 2003 2:27 pm
- Location: portland, or
- Contact:
Re: Mic'ing a Bass with a Condensor
i get varied results depending on what kind of speaker cab is being used. 4033's sound good for 15" speakers(6" from speaker), i like my akg solidtube for 12's or 10's a little back(12"-18") , for multiple 8", or ampeg 8X10" i sometimes like a d-112(18"-24"). depends on the weather too.....and the phase of the moon...
Re: Mic'ing a Bass with a Condensor
I have been using an RE-20 with good results. I have not tried a condensor myself but I have heard that the AT 4047 works well for bass. Has anyone tried it?
jason
jason
Re: Mic'ing a Bass with a Condensor
I'm all about the RE-20, I had quite good results all around.. My favoite way is to plop a U-87 in front and mix with a DI.
- psychicoctopus
- buyin' a studio
- Posts: 890
- Joined: Wed May 14, 2003 3:01 am
- Location: Austin, TX
Re: Mic'ing a Bass with a Condensor
Really? Can you name some delays that have enough fidelity to be effective at this? We're talking about sub-millisecond stuff, right?bignerd wrote:You can also fix your problem ... by simply delaying the close microphone so that it is coherent with the further mic. If recording analog, and you have an accurate digital delay, you can simply run out of the mic-pre your close mic is plugged into, and run it into your delay box. Set the appropriate delay with your ears or by the distance/time formula and send your signal straight to tape.
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
Re: Mic'ing a Bass with a Condensor
bass: 4033 and an re20.
I love the 4033 on anything that needs to bark.
4033/bk5 has been my starting point for rock guitar for about 7 years now.
I love the 4033 on anything that needs to bark.
4033/bk5 has been my starting point for rock guitar for about 7 years now.
Who is online
Users browsing this forum: Google [Bot] and 73 guests