Trying to get decent heavy guitar direct sound... gear help
- theshaggyfreak
- gimme a little kick & snare
- Posts: 98
- Joined: Sat Jan 29, 2005 4:41 am
- Location: Centreville, VA
- Contact:
I've been trying that for awhile and I really like it. In fact heres some new samples:RefD wrote:try processing the result thru Boogex with the appropriate speaker impulse (there's a link for downloading a few including Hiwatt and Mesa).
I did mic these with my AT2020, an inch away from the speaker. Volume wasn't very high, but enough to pickup.
This uses Guitar Rig 3 with a Dimebag preset, no other plugins.
1. http://www.supload.com/listen?s=PCK3GN1GBMLA
This second one uses CrunchDude + Boogex (in that order)
2. http://www.supload.com/listen?s=QS24AWC8Q2J7
Thanks for all the input.
- Brett Siler
- moves faders with mind
- Posts: 2518
- Joined: Fri Dec 05, 2003 12:16 pm
- Location: Evansville, IN
- Contact:
Some really good suggestions so far. I have to agree with everyone on here that you should at least throw ahumbucker in yr Strat or you'll be struggling to get the tone you are after. I know Yngwie uses a Strat but he doesn't really play chunky riffs like the artist examples you gave.
As for software, I have heard some pretty heavy stuff from Revalver. It's VST and AU compatible.
I have a Zoom G2 and you can get some good sounds with that if you do a little tweaking.
I also have heard people use amp simulators like a POD or V-amp but instead of using the speaker simulation the used an impulse response of a speaker, and that has sounded really good.
The direct out on the Vox Valvetonics amp sounds really good. I have done two recordings using just the direct out and it sounds great!
I know this is gear talk but a few people have touched on some techniques and I will too. Like someone said you may need to you a low pass filter and get rid of some highend fuzz on some. Also someone said to not uses as much distortion as you think you should. Here is the key I have found. Tone down the distortion a little (not too much you still want it to sound heavy) to where there is clearity there. Then layer that guitar track a few times, either just playing it over and over again (if you think you can keep the performance tight enough) or reamp it several times (or maybe in computer you could just copy and paste the performace, dunno never tried that). I like to mix and match amps and get a frankentone.
Use yr ears and have fun!
As for software, I have heard some pretty heavy stuff from Revalver. It's VST and AU compatible.
I have a Zoom G2 and you can get some good sounds with that if you do a little tweaking.
I also have heard people use amp simulators like a POD or V-amp but instead of using the speaker simulation the used an impulse response of a speaker, and that has sounded really good.
The direct out on the Vox Valvetonics amp sounds really good. I have done two recordings using just the direct out and it sounds great!
I know this is gear talk but a few people have touched on some techniques and I will too. Like someone said you may need to you a low pass filter and get rid of some highend fuzz on some. Also someone said to not uses as much distortion as you think you should. Here is the key I have found. Tone down the distortion a little (not too much you still want it to sound heavy) to where there is clearity there. Then layer that guitar track a few times, either just playing it over and over again (if you think you can keep the performance tight enough) or reamp it several times (or maybe in computer you could just copy and paste the performace, dunno never tried that). I like to mix and match amps and get a frankentone.
Use yr ears and have fun!
My musical endeavors!
My Music: http://www.brettsiler.bandcamp.com/
StudioMother Brain Sound Infrastructure
My Music: http://www.brettsiler.bandcamp.com/
StudioMother Brain Sound Infrastructure
-
- speech impediment
- Posts: 4270
- Joined: Tue Aug 12, 2003 5:31 pm
- Location: Norman, OK
- Contact:
excellent advice.subatomic pieces wrote:This is great advice.wren wrote:don't feel like you need to get a huuuuge low-end out of your guitar tone. That's what the bass is for. If you have a massive low end, either you or the bass is going to completely disappear.
?What need is there to weep over parts of life? The whole of it calls for tears.? -- Seneca
- NeglectedFred
- pushin' record
- Posts: 248
- Joined: Tue Jan 18, 2005 6:53 pm
- Location: Salt Lake City
Ibanez makes a pedal called the SM7 Smashbox, there's also one by Hughes and Kettner called the warp factor. Both you can find dirt cheap, and this is exactly the sound thet make.
Forget the Line 6 stuff, it blows.
I've gotten some of the meanest direct tones with either of those two pedals into a Rocktron Chameleon (just a good honest clean solid state pre) it also has a half decent cab emulator - but it's more of a harsh freq remover.
A metal zone might be a good second choice, but for the love of your ears, don't buy that crappy orange thing BOSS makes, the one that try's to impersonate nu metal, it sucks.
If you want to hear some of the tones I've captured with those stomp boxes into a chameleon let me know.
For heavy stuff I always do direct and mic, but the mic is usually turned up just enough to fill a void. That direct chain sounds tougher than my EMG's through a dual rec.
Forget the Line 6 stuff, it blows.
I've gotten some of the meanest direct tones with either of those two pedals into a Rocktron Chameleon (just a good honest clean solid state pre) it also has a half decent cab emulator - but it's more of a harsh freq remover.
A metal zone might be a good second choice, but for the love of your ears, don't buy that crappy orange thing BOSS makes, the one that try's to impersonate nu metal, it sucks.
If you want to hear some of the tones I've captured with those stomp boxes into a chameleon let me know.
For heavy stuff I always do direct and mic, but the mic is usually turned up just enough to fill a void. That direct chain sounds tougher than my EMG's through a dual rec.
I eat glue.
Sorry for the latency, didn't notice this in my attempts until I auditioned the samples and didn't feel like re-recording as I'm experimenting.
Ok here I mic'd the Crate not high-volume, not high-gain (maybe about 6.5 - 7)
http://www.supload.com/listen?s=4DEN55EJLF20
Here's settings I initially used
And here's the output file and panned w/ delay and some EQ
Ok here I mic'd the Crate not high-volume, not high-gain (maybe about 6.5 - 7)
http://www.supload.com/listen?s=4DEN55EJLF20
Here's settings I initially used
And here's the output file and panned w/ delay and some EQ
-
- gimme a little kick & snare
- Posts: 93
- Joined: Fri Feb 15, 2008 8:35 am
- Location: Charlotte, NC
- Contact:
I'd like to second the recommendation on the POD - I use an XT Pro mostly now. You can hear what I've gotten for direct sounds at my MySpace page. You can re-amp with it too. I also use an Ensoniq DP/4 direct - listen at DukesNitemare.com for those sounds.
One thing I do is tend to print the fx rather than add them at mixdown. Sometimes it works, sometimes not.
My best direct sound though has been through a Digitech GSP 21 Pro - awesome speaker simulator in the chain, IMHO.
I've got my POD XT patches up on the customtone.com site, just search "Silverwing" or "Thor" and you'll find them if you use a POD XT rack.
One thing I do is tend to print the fx rather than add them at mixdown. Sometimes it works, sometimes not.
My best direct sound though has been through a Digitech GSP 21 Pro - awesome speaker simulator in the chain, IMHO.
I've got my POD XT patches up on the customtone.com site, just search "Silverwing" or "Thor" and you'll find them if you use a POD XT rack.
"I avoided capture by using your Mak'tar stealth haze"
--Quellek
Donnie Maynard Christianson
aka Circuit Scream
Sci-fi Inspired Ambient/Electronic Guitar Rock
http://twitter.com/circuitscream
--Quellek
Donnie Maynard Christianson
aka Circuit Scream
Sci-fi Inspired Ambient/Electronic Guitar Rock
http://twitter.com/circuitscream
- calaverasgrandes
- ghost haunting audio students
- Posts: 3233
- Joined: Wed Jul 25, 2007 11:23 pm
- Location: Oakland
- Contact:
I'm not really into the bands you mentioned. i once got into an altercation with some guy from Coal Chamber because I toldhim his band sucked (I was drunk, they were playing at a Goth Club in SF).
But that all aside I got a few tips for heavy tones. I actually usually tune down a bit to B or C. Experiment with differnt guage strings. I actually like medium or light guage strings on low tuned instruments. It gives you less fundemental and more overtones. More of a rattling crazy sound. I didnt invent this, I stole the idea from Les Claypool.
I often will kill the tone knob on a guitar to send a "browner" signal to the amp. then I try and bring the treble back out with overdrive/fuzz. That way you get a nice bright distortion sound without shiny harshness. Of course you might be using an amp sim for this.
Sometimes I record parts totally clean, then screw around with amps sims. I generally hate amp sims. But its not good to get stuck too much in one way of doing things. besides recording clean gives you a lot of oportunities to listen to what you are actually playing and nt hide behind the fuzz! (I know it sounds hippy and patronizing but I discovered this when my old rehersal space got shut down and we practiced for a couple months on acoustics!)
Another thing I do a lot is set up the amp very bassy and loud and then cut the bottom off with a high pass filter. Either on the preamp or in the DAW itself. This gives a big saturated sound with the impression of bass. But you are really just hearing the intermodulation distortion artifacts.
In a weird way sometimes you actually want a very tiny guitar sound.
I try and create an audio image of a giant guitar stack...80 yards away outdoors. you really would only hear the midrange, air absorbs treble very fast, and bass disipates omnidritionally. It also helps to compress or limit the track. Some guys compress going into the amp. Then Limit the recorded signal!
Last, Cant you just wait until your housemates are gone and wail?
But that all aside I got a few tips for heavy tones. I actually usually tune down a bit to B or C. Experiment with differnt guage strings. I actually like medium or light guage strings on low tuned instruments. It gives you less fundemental and more overtones. More of a rattling crazy sound. I didnt invent this, I stole the idea from Les Claypool.
I often will kill the tone knob on a guitar to send a "browner" signal to the amp. then I try and bring the treble back out with overdrive/fuzz. That way you get a nice bright distortion sound without shiny harshness. Of course you might be using an amp sim for this.
Sometimes I record parts totally clean, then screw around with amps sims. I generally hate amp sims. But its not good to get stuck too much in one way of doing things. besides recording clean gives you a lot of oportunities to listen to what you are actually playing and nt hide behind the fuzz! (I know it sounds hippy and patronizing but I discovered this when my old rehersal space got shut down and we practiced for a couple months on acoustics!)
Another thing I do a lot is set up the amp very bassy and loud and then cut the bottom off with a high pass filter. Either on the preamp or in the DAW itself. This gives a big saturated sound with the impression of bass. But you are really just hearing the intermodulation distortion artifacts.
In a weird way sometimes you actually want a very tiny guitar sound.
I try and create an audio image of a giant guitar stack...80 yards away outdoors. you really would only hear the midrange, air absorbs treble very fast, and bass disipates omnidritionally. It also helps to compress or limit the track. Some guys compress going into the amp. Then Limit the recorded signal!
Last, Cant you just wait until your housemates are gone and wail?
??????? wrote: "everything sounds best right before it blows up."
For what it's worth, and I think I'll start a thread on this with some graffics showing it, when using digi-simulators like the POD, I find they have a fizz, often in the 9-10kHz area depending on the patch.
I find a low-pass filter especially helpful with simulators, and for rhythm guitars often set it around 5kHz or as low as 3.5khz, and pretty steep.
Let me again state that the Zoom GM-200, a US$50 cheapo analog plastic piece of doggie-poo, does a fair simulation of a lot of amps, including what it calls "blackface recto" or like that. I definitely have to high-pass it.
I find a low-pass filter especially helpful with simulators, and for rhythm guitars often set it around 5kHz or as low as 3.5khz, and pretty steep.
Let me again state that the Zoom GM-200, a US$50 cheapo analog plastic piece of doggie-poo, does a fair simulation of a lot of amps, including what it calls "blackface recto" or like that. I definitely have to high-pass it.
before you spend money on plugin amp simulators you should really try these free alternatives:
Aradaz Amps
Simulanalog Suite
Juicy 77 Hi gain amp
Stuido Devil free amp sim
Dirthead
If you have a good input signal (DI/preamp) you can get ridiculously good sounds! Google away.
Aradaz Amps
Simulanalog Suite
Juicy 77 Hi gain amp
Stuido Devil free amp sim
Dirthead
If you have a good input signal (DI/preamp) you can get ridiculously good sounds! Google away.
Slider wrote:"we figured you'd want to use your drum samples and reamp through your amps anyway, so we didn't bother taking much time to get sounds".
Who is online
Users browsing this forum: No registered users and 173 guests