polarity-before or after recording?
polarity-before or after recording?
Okay, I am obviously not a scientist or even a techie by any claim. My question is this: can someone explain to me in layman's terms if switching polarity on a track that is already recorded actually changes the polarity of the playback? I want to know if I can deal with phasing issues during mixdown or do I need to have the polarity questions worked out before I hit the tape? If not, why not? Remember, I am a normal person. I can program a vcr, but if you start talking about flux rates and fletcher-munsen whatever, my eyes glaze over.
Thanks for helping a (relative) newbie.
Thanks for helping a (relative) newbie.
Drummers might not be the smartest, but we are probably the strongest!
- the finger genius
- re-cappin' neve
- Posts: 746
- Joined: Wed Nov 15, 2006 1:32 pm
The quick answer is, yes you can do it in mixdown.
Long Answer:
I think many people on this board would advise you (if you can) to at least have a good listen before tracking and try flipping before laying down tracks, to commit to "tape" whatever sounds better. You can always flip back (again) in mixdown if for whatever reason you like it better that way.
On the other hand, I'm in a situation without any control room, and I'm pretty much always sitting in the same small room as drums while tracking, usually right next to them with headphones, so I don't often have this luxury. When I need to (which is fairly rare since I seldom use more than three or four drum mics) I end up flipping phase with a plug in after the fact. When doing this, you also have to be aware of whatever latency the plug in might be introducing (assuming you're using a DAW without automatic latency compensation.)
Long Answer:
I think many people on this board would advise you (if you can) to at least have a good listen before tracking and try flipping before laying down tracks, to commit to "tape" whatever sounds better. You can always flip back (again) in mixdown if for whatever reason you like it better that way.
On the other hand, I'm in a situation without any control room, and I'm pretty much always sitting in the same small room as drums while tracking, usually right next to them with headphones, so I don't often have this luxury. When I need to (which is fairly rare since I seldom use more than three or four drum mics) I end up flipping phase with a plug in after the fact. When doing this, you also have to be aware of whatever latency the plug in might be introducing (assuming you're using a DAW without automatic latency compensation.)
_________________vvv wrote:
That said, what I'm gettin' at is, perfectionism is for the truly defective.
You may quote me.
-
- re-cappin' neve
- Posts: 778
- Joined: Fri Dec 30, 2005 12:07 pm
- Location: Sunnyside Queens, NY
What Finger said. Plus, I'd add that if you do find that you need to flip the polarity of a track after recording then process the file with the flip. I know in PT there's an Invert Audiosuite. I'm sure there's similar options in other DAWs. This way you don't have to think about it again and save on processing power and latency.the finger genius wrote:The quick answer is, yes you can do it in mixdown.
Long Answer:
I think many people on this board would advise you (if you can) to at least have a good listen before tracking and try flipping before laying down tracks, to commit to "tape" whatever sounds better. You can always flip back (again) in mixdown if for whatever reason you like it better that way.
On the other hand, I'm in a situation without any control room, and I'm pretty much always sitting in the same small room as drums while tracking, usually right next to them with headphones, so I don't often have this luxury. When I need to (which is fairly rare since I seldom use more than three or four drum mics) I end up flipping phase with a plug in after the fact. When doing this, you also have to be aware of whatever latency the plug in might be introducing (assuming you're using a DAW without automatic latency compensation.)
"If there's one ironclad rule of pop history, it's this: The monkey types Hamlet only once."
- the finger genius
- re-cappin' neve
- Posts: 746
- Joined: Wed Nov 15, 2006 1:32 pm
-
- speech impediment
- Posts: 4270
- Joined: Tue Aug 12, 2003 5:31 pm
- Location: Norman, OK
- Contact:
Get it right during tracking, where you still have the option to change mics or move them around to get the sounds right. If you've got phasing when you're listening and getting sounds, how do you know if that kick mic sounds as good as it can. What if you wait until after the fact and discover that the kick track sounds really wrong.
Getting it right during tracking lets you hear exactly what you're capturing.
Getting it right during tracking lets you hear exactly what you're capturing.
-
- zen recordist
- Posts: 10890
- Joined: Mon Jun 16, 2003 1:26 am
- Location: Charlotte, NC
- Contact:
+1!subatomic pieces wrote:Get it right during tracking, where you still have the option to change mics or move them around to get the sounds right. If you've got phasing when you're listening and getting sounds, how do you know if that kick mic sounds as good as it can. What if you wait until after the fact and discover that the kick track sounds really wrong.
Getting it right during tracking lets you hear exactly what you're capturing.
If you get the polarity right at the beginning, it's amazing how much less EQ and additional processing you'll find yourself needing to use.
Chris Garges
Charlotte, NC
- ott0bot
- dead but not forgotten
- Posts: 2023
- Joined: Thu Jan 15, 2009 4:54 pm
- Location: Downtown Phoenix
Exactly! Especially when recording analog. Getting rid of the phase on drum mic's and dual mic'd guitar cabs really makes it sound better than trying to pull it out of the mix later. Take and extra 10 minutes to adjust the mics and find the perfect sound rather than wasting much more time later trying to fix it.subatomic pieces wrote:Get it right during tracking, where you still have the option to change mics or move them around to get the sounds right. If you've got phasing when you're listening and getting sounds, how do you know if that kick mic sounds as good as it can. What if you wait until after the fact and discover that the kick track sounds really wrong.
Getting it right during tracking lets you hear exactly what you're capturing.
But if you do wind up with some phase, it's pretty easy to process the audio on a DAW without any lag or change in quality. I do that when micing mid-side into protools. Just a quick pan and invert process and you're set for a nice full sound without the phase.
-
- pluggin' in mics
- Posts: 36
- Joined: Sat Feb 07, 2004 12:10 am
- Location: austin, texas
- Contact:
-
- zen recordist
- Posts: 10890
- Joined: Mon Jun 16, 2003 1:26 am
- Location: Charlotte, NC
- Contact:
If you're flipping the polarity of one of the mics in that scenario, then you're actually recording the combined signal "in phase." The opposing movement of the speaker creates a negative phase relationship between mics in front of and behind the speaker. Flipping the polarity of one of them corrects the relationship.bigtexasthriller wrote:That said, I have gotten killer sounds recording guitars out of phase with a 57 in front, and a 421 behind the speaker.....
But yeah, it can be really cool to record stuff intentionally out of phase.
Chris Garges
Charlotte, NC
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
true, but I would add:farview wrote:I would also like to point out that not every phase problem is 180 degrees out. 90 degrees out of phase sounds like crap too, but the phase button won't help you. It's better to move the mic if you have the choice.
Phase "issues" are NEVER 180 degrees out, but the idea is to listen, and decide whether 41+ or 41- gives you a more flattering result, and at that point, IMHO, you would move the mic if both switch positions sound crappy to you.
polarity switching before or after
That is all excellent advice. I am going to try and get it right before I hit the tape, I agree that extra eq'ing and switching after the fact will only complicate things. Tape Op rocks!!
Drummers might not be the smartest, but we are probably the strongest!
-
- re-cappin' neve
- Posts: 642
- Joined: Thu Apr 22, 2004 9:25 am
- Location: Nashville, TN
- Contact:
something i like to do (which is common practice) is click out mics using an acoustic phase checker to make sure all the mics are in phase all the way to "tape" before i start getting sounds, that way i know that any phase flipping i'm doing is to hear sonic differences, not compensate for an out of phase mic, cable, or compressor.
this isn't the same brand i own, but the first that came up in a google search:
http://www.alphaton.com/english/products/pc-100-e.htm
it's amazing what i learned about my gear (and other studios) when i started clicking out every session! LOL
-chris
this isn't the same brand i own, but the first that came up in a google search:
http://www.alphaton.com/english/products/pc-100-e.htm
it's amazing what i learned about my gear (and other studios) when i started clicking out every session! LOL
-chris
Owner: Welcome To 1979 Studio & Mara Machines
-
- zen recordist
- Posts: 10890
- Joined: Mon Jun 16, 2003 1:26 am
- Location: Charlotte, NC
- Contact:
Good point, too. I have a few mics that are wired pin 3 hot, so I know that I have to reverse those if I'm using them next to a mic that's pin 2 hot in an x-y arrangement, for example.cjmnash wrote:something i like to do (which is common practice) is click out mics using an acoustic phase checker to make sure all the mics are in phase all the way to "tape" before i start getting sounds, that way i know that any phase flipping i'm doing is to hear sonic differences, not compensate for an out of phase mic, cable, or compressor.
Chris Garges
Charlotte, NC
Who is online
Users browsing this forum: Google [Bot] and 69 guests