Revisit: Drewtronics Sherlock

iC · Post by iC » Tue Nov 06, 2007 1:31 pm

Finally got around to putting this together. The board is all soldered and complete, but i have no wiring diagram to show were the switches/ XLR/1/4"/trannies hook up.
In searching the board i found a picture of a stereo unit's guts.... though the shadows make it a bit difficult to decipher...
Any help?

cheers, kevin

Milkmansound · Post by **Milkmansound** » Tue Nov 06, 2007 3:30 pm

I am pretty sure I have a PDF of the manual somewhere that drew sent me - but I am on the road right now and do not have it with me.

if you still can't find it in a week, PM me and I will look through files on my home computer.

iC · Post by iC » Fri Nov 16, 2007 9:36 am

Hi again folks.
So MilkmanSound's help didn't quite pan out (i had already culled his available info from the archives...), but it was much appreciated....
Specifically i am looking for the WIRING diagram, not the basic directions.... Perhaps someone has a high resolution foto of their guts?
If i could read schematics better, would the Shure Level Lock schematic give me the actual wiring diagram?
cheers, kevin

inverseroom · Post by **inverseroom** » Fri Nov 16, 2007 3:37 pm

Send drew a PM...he's toothpastefordinner on here.

toothpastefordinner · Post by **toothpastefordinner** » Sat Nov 17, 2007 4:02 pm

I got nothin', sorry. Gave the project to an interested party a couple years ago and got rid of the docs.

leigh · Post by **leigh** » Thu Nov 29, 2007 10:20 am

iC wrote:Specifically i am looking for the WIRING diagram, not the basic directions.... Perhaps someone has a high resolution foto of their guts?
If i could read schematics better, would the Shure Level Lock schematic give me the actual wiring diagram?
cheers, kevin

I think I've got what you're looking for: Sherlock schematic and board layout side-by-side. PM me your email address and I'll send it over.

IIRC, the original Shure schematic is really close, but since there were 2 versions they released, you'd need to make sure that you were using the right schem. Plus, troubleshooting will be 100x easier with the layout diagram.

Leigh

EDIT: Oh wait, you're looking for info on the non-PCB parts... I might have that around somewhere on paper.

MechaGodzilla · Post by **MechaGodzilla** » Thu Nov 29, 2007 10:50 pm

...Think I have the whole packet lying around somewhere. I'll dig.

leigh · Post by **leigh** » Fri Nov 30, 2007 11:44 am

toothpastefordinner wrote:I got nothin', sorry. Gave the project to an interested party a couple years ago and got rid of the docs.

Drew,

What would the legality be of me posting the schem and wiring diagram online? I've had a few requests already here, by PM, for copies. It would be easiest to just post the documents and put a link up here.

We can discuss further privately if you wish...

cheers,
Leigh

The Scum · Post by **The Scum** » Fri Nov 30, 2007 12:37 pm

If you poke around Shure's web site, you can find the schem in their discontinured manuals section. It's from that lovely era when the schem was part of the users manual.

Here's a schem, I'm not sure if it's entirely correct for the Sherlock:
http://www.freeinfosociety.com/electron ... rem62v.pdf

leigh · Post by **leigh** » Mon Feb 23, 2009 10:41 am

I've gotten a couple PM's about the Sherlock wiring diagram in the last week. If I can find my copy, I will scan and post it. Drew has long since moved on from this project, and since it's just the wiring diagram (and not complete schematic or design) I don't think he'd mind. But I'll ask him again, to be sure...

cheers,
Leigh

toothpastefordinner · Post by **toothpastefordinner** » Sat Feb 28, 2009 7:36 pm

I don't have any of the docs left, but just to be clear, you all are welcome to share anything you need to get them up and running or create your own Level Loc clone...

Tungstengruvsten · Post by **Tungstengruvsten** » Tue Mar 03, 2009 4:37 pm

I just found mine and remembered this thread...still need them? I can scan them in...

RefD · Post by **RefD** » Tue Mar 03, 2009 7:03 pm

that would be awesome.

Tungstengruvsten · Post by **Tungstengruvsten** » Thu Mar 05, 2009 6:41 pm

k - won't get to it till this weekend

Tungstengruvsten · Post by **Tungstengruvsten** » Mon Mar 09, 2009 3:48 pm

OK folks - here it is!

Complete Drewtronics Sherlock Manual
http://www.sendspace.com/file/gd1ftx

Message Board

Revisit: Drewtronics Sherlock

Revisit: Drewtronics Sherlock

Still Looking

Re: Still Looking

Who is online