80-8 schematics & manual - Fuse #7
80-8 schematics & manual - Fuse #7
Anyone have an active(AnalogRules is apparently down) link to 80-8 schematics/manual?
Or if anyone has it already downloaded - The info I'm looking for is:
What circuit is Fuse # 7 (2.5A slo-blo) tied in to?
Thanks in advance
Or if anyone has it already downloaded - The info I'm looking for is:
What circuit is Fuse # 7 (2.5A slo-blo) tied in to?
Thanks in advance
- calaverasgrandes
- ghost haunting audio students
- Posts: 3233
- Joined: Wed Jul 25, 2007 11:23 pm
- Location: Oakland
- Contact:
-
- audio school graduate
- Posts: 11
- Joined: Tue Sep 22, 2009 5:49 pm
- Location: Hamilton, Ontario
Tired Eyes wrote:Fuse 7 is the 24V DC power supply for the record / reproduce amp. If it blows check the voltage regulator IC2 and the rectifier diodes first. I have pdf's of the schematic + manual, send me your email and I'll fire them off to you.
Thanks TiredEyes, I had a feeling a voltage regulator was involved. It may be going on the fritz. Luckily I've had no more problems with it but I'll probably grab some spares.
I'll send my email as PM
Thanks again
Have you checked the relays? I can't remember how they're mounted - but if socketed try reseating. Check voltages on the relay pins. Sometimes the relay contacts will get a buildup on them. I have heard mention of the 80-8 relays occasionally getting stuck though I've never had that problem with mine.
Does pressing both REC & PAUSE at the same time show the rec-ready position: rec light blinking?
Does pressing both REC & PAUSE at the same time show the rec-ready position: rec light blinking?
I will check and re-seat the relays. Pressing both REC & PAUSE at the same time does nothing.lassoharp wrote:Have you checked the relays? I can't remember how they're mounted - but if socketed try reseating. Check voltages on the relay pins. Sometimes the relay contacts will get a buildup on them. I have heard mention of the 80-8 relays occasionally getting stuck though I've never had that problem with mine.
Does pressing both REC & PAUSE at the same time show the rec-ready position: rec light blinking?
I've gone to some site numerous times to download the schematics, but couldn't. Get an error message.
TNX for your replies!
Who is online
Users browsing this forum: No registered users and 46 guests