Photo album. Enjoy.
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
Photo album. Enjoy.
I made this album on Facebook open to all:
http://on.fb.me/misYPZ
Check it out. some detail shots of certain aspects of a build out.
http://on.fb.me/misYPZ
Check it out. some detail shots of certain aspects of a build out.
-
- speech impediment
- Posts: 4270
- Joined: Tue Aug 12, 2003 5:31 pm
- Location: Norman, OK
- Contact:
Great pics! Thanks Joel!
Studio - http://www.hookechosound.com
Label - http://www.wearenicepeople.com
Band - http://www.depthandcurrent.com
Twitter - http://www.twitter.com/HoodEchoSound
Label - http://www.wearenicepeople.com
Band - http://www.depthandcurrent.com
Twitter - http://www.twitter.com/HoodEchoSound
-
- speech impediment
- Posts: 4270
- Joined: Tue Aug 12, 2003 5:31 pm
- Location: Norman, OK
- Contact:
Question re: your floor construction. I see how the individual rooms will all be built on independent floating floors. So, for each floated floor, there's a 2x4 frame, sand, plastic, insulation, mdf, sheetrock, plywood. Where's the neoprene? Is it used to decouple your frame from the subfloor? How much is used? Sheets or strips or what?
Also, I'm getting ahead of things here.... but, how do you decouple the floating floors from the walls between them? Just leave a gap?
I'm super excited to see all of this stuff! I'll probably be doing a similar buildout next year. This is incredibly fascinating!
Also, I'm getting ahead of things here.... but, how do you decouple the floating floors from the walls between them? Just leave a gap?
I'm super excited to see all of this stuff! I'll probably be doing a similar buildout next year. This is incredibly fascinating!
Studio - http://www.hookechosound.com
Label - http://www.wearenicepeople.com
Band - http://www.depthandcurrent.com
Twitter - http://www.twitter.com/HoodEchoSound
Label - http://www.wearenicepeople.com
Band - http://www.depthandcurrent.com
Twitter - http://www.twitter.com/HoodEchoSound
-
- speech impediment
- Posts: 4270
- Joined: Tue Aug 12, 2003 5:31 pm
- Location: Norman, OK
- Contact:
I think I figured out the wall thing just by staring at the pics for a few minutes.
Studio - http://www.hookechosound.com
Label - http://www.wearenicepeople.com
Band - http://www.depthandcurrent.com
Twitter - http://www.twitter.com/HoodEchoSound
Label - http://www.wearenicepeople.com
Band - http://www.depthandcurrent.com
Twitter - http://www.twitter.com/HoodEchoSound
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
Thats how I designed the whole place!subatomic pieces wrote:I think I figured out the wall thing just by staring at the pics for a few minutes.
Lets make a distinction here:
SHELL WALL touches existing structure.
FLOAT WALL does not touch anything.
The Floats are up on 1/4" neoprene. The sand is not for the float, it is mass to reduce crosstalk between rooms. It damps the existing floor, as we are not on a slab, and chose not to pour a 2 " slab in the space.
R11 fiberglass, paper faced insulation is used in the joists, above the sand.
Basically, the float is a "bridge" over the sand/exisiting floor, suspended by neoprene.
Neoprene retains its isolating qualities even under a lot of compression. rubber becomes ROCK under that much compression.
Then the deck of the float is 5/8" MDF, then 5/8" sheetrock, then 5/8" plywood, with Parquet flooring being installed pretty much throughout.
This is a three room facility, with a 5000 sq ft existing structure that was a carriage house for a bakery built around 1898/1900.
Anyway...
The Float walls are built up on those decks, and the shell walls are built on the existing floor. all sheet stock is 5/8" so assume it when I say things like:
The shell wall carries 2 layers of sheetrock throughout the facility. The float walls carry 3 layers of sheetrock in the live rooms, and 2 layers in the control rooms.
The airspace between the shell and the float walls varies throughout the facility based on multiple factors, but will never be less than 2" at any given point.
The shell wall puts the floats/studios in their own bulding, essentially, and then the float walls comprise the rooms and studio spaces you want. Thats the easy way to think of it, and then mire yourself down in the STC/transmission loss/Surface density equations in the Handbook for Sound engineers later when you want to have multiple anxiety attacks at 3am on a tuesday night before you place a 5 figure order for materials with a crane truck and a flag man and a cew of workers coming in. ... just sayin...
There are certain details that were specified by the architect, after he and I went over the design I had in mind, and they are specific to the space I am in.
It is not unlike mixing... i know a lot of guys that get great sounds and cant define the "knee" of a compressor.... its irrelevant if you are using the device to make good mixes.
Same deal here: specify the right stuff based on proven methods, and you really dont have to be able to do the math to calculate the surface density of the materials you are hanging between yourself and a wide open 8x10" SVT rig.
The design is more imortant anyway.... if you have two live rooms for two studios built right up against each other: yes you will need lead, cement, airlocks, rubber, cork, springs, denim, 703, 4 million layers of brick and drywall, and a a prayer service in your name.
If you just put the control rooms closest to each other, with the live rooms as far away from each other in the space: it all becomes simpler again, and the fact that you have two studios (three in our case) under one roof can be boiled down to one word: expensive...
no:
Design.
Make it smart. Make it right, and it will work for you every day.
I designed this place based on experience. What I did or didnt like about the studios I have worked in over the years.
People who know those studios will probably see parallels... maybe not.
It is a unique space, with a character that suits the people who will be working in there: me and Tony Maimone.
This is not a public space, so we can do whatever we want, and what we want is to work every day in a monument to sticking with our dream, learning by experience, and saving up enough money making music to realize that dream.
I have been physically hauling in every single piece of material that comes in through a giant window on a crane, and we all have been working our asses off with the GC to make this work. there is pride in how we got here in every single board in the place.
Thats the most important thing to us. The place has actual soul.
We are even building pictures, of friends and family no longer on this earth and not around to share in this adventure, into the walls and floors and all around us.
We will know they are there.
-
- zen recordist
- Posts: 6677
- Joined: Wed May 07, 2003 11:15 am
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
- No Wave Casio Kitsch
- re-cappin' neve
- Posts: 686
- Joined: Sun Sep 07, 2003 8:49 pm
- Location: Los Angeles
- Contact:
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
-
- audio school graduate
- Posts: 24
- Joined: Fri Aug 01, 2008 9:58 am
- Location: Melbourne
- Contact:
- JohnDavisNYC
- ghost haunting audio students
- Posts: 3035
- Joined: Fri Oct 03, 2003 2:43 pm
- Location: crooklyn, ny
- Contact:
-
- steve albini likes it
- Posts: 365
- Joined: Sat May 22, 2004 8:08 pm
- Location: little rock, arkansas
- Contact:
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
-
- steve albini likes it
- Posts: 365
- Joined: Sat May 22, 2004 8:08 pm
- Location: little rock, arkansas
- Contact:
Who is online
Users browsing this forum: No registered users and 153 guests