Who uses a XLR patchbay at home?
Who uses a XLR patchbay at home?
Any pros or cons for it?
I'm thinking about leaving some mic's up all the time (just bag-covered on stands), and leaving a cuppla recording chains set for repeated use and so I'm thinking a XLR p.b. could be good, and save me from messing with the rear-mount connectors or from having connected 15'+ cables hanging around.
I'm thinking about leaving some mic's up all the time (just bag-covered on stands), and leaving a cuppla recording chains set for repeated use and so I'm thinking a XLR p.b. could be good, and save me from messing with the rear-mount connectors or from having connected 15'+ cables hanging around.
-
- suffering 'studio suck'
- Posts: 464
- Joined: Tue Mar 13, 2007 6:50 pm
- Location: Central VA
- Contact:
They take up a lot more space per patch point than a conventional patchbay. That's really the only drawback.
That and you'll probably have to make it yourself unless you get lucky on ebay, but they're super-easy to put together: take a plastic rack blank or a strip of plywood, some XLR terminals, a drill, and an afternoon and voila!
That and you'll probably have to make it yourself unless you get lucky on ebay, but they're super-easy to put together: take a plastic rack blank or a strip of plywood, some XLR terminals, a drill, and an afternoon and voila!
"I don't need time, I need a deadline." -Duke Ellington
"I liked the holes in it as much as I liked what was in them." -Tom Waits
"I liked the holes in it as much as I liked what was in them." -Tom Waits
- Gregg Juke
- cryogenically thawing
- Posts: 3544
- Joined: Fri Jun 11, 2010 10:35 pm
- Location: Buffalo, NY, USA
- Contact:
- farview
- tinnitus
- Posts: 1204
- Joined: Tue Aug 31, 2004 1:42 pm
- Location: St. Charles (chicago) IL
- Contact:
That's what the mic cables are for. It wouldn't be any different with a patch bay. That's what a stage snake is, an XLR patchbay that sits on the floor.
If you only ever need to be 10 feet away from your stuff, it might be just as easy to have a bunch of mic cables permanently hooked up to the different signal chains. Then you just mark the mic end of it, so you know which one is which.
If you only ever need to be 10 feet away from your stuff, it might be just as easy to have a bunch of mic cables permanently hooked up to the different signal chains. Then you just mark the mic end of it, so you know which one is which.
I think anything you can do to reduce the number of times you say' 'F it, I'll do it later" because you don't feel like setting up and breaking down a chain is money well spent. Stuff like fumbling around behind your rack with a flashlight definitely fall in that category. Get that stuff where it's power up and go if you can. How that plays out in your room I couldn't say.
-
- suffering 'studio suck'
- Posts: 464
- Joined: Tue Mar 13, 2007 6:50 pm
- Location: Central VA
- Contact:
Hah, I didn't even know those existed, although I guess it was stupid to assume that they didn't. I've only ever seen diy ones, and I've seen a whole ton of them, so I assumed that you just had to do it that way.
"I don't need time, I need a deadline." -Duke Ellington
"I liked the holes in it as much as I liked what was in them." -Tom Waits
"I liked the holes in it as much as I liked what was in them." -Tom Waits
- ott0bot
- dead but not forgotten
- Posts: 2023
- Joined: Thu Jan 15, 2009 4:54 pm
- Location: Downtown Phoenix
yup. Me too. Then you can just move your snake where you need to track. You could leave the mics up and just use some velcro ties to keep the cable hooked to the mic and stand.farview wrote:An alternative would be to just buy a stage snake. Hook the mixer side to your signal chains, preamps, etc... have the stage box out by the microphones. Essentially, that's what I do.
another nice thing about a snake is the TRS returns. I have my headphone amp hooked to two of the TRS returns and the other 2 TRS returns are for Reamps (radial x-amp).
- digitaldrummer
- cryogenically thawing
- Posts: 3525
- Joined: Wed Nov 23, 2005 9:51 pm
- Location: Austin, Texas
- Contact:
I have that exact ART XLR patchbay. it works great for my needs - which is to prevent the need for crawling behind the rack to repatch stuff. I have a TRS patch bay too. I have short snakes that connect my interface (digi 002r and RME ADI) to the XLR patch panel and then I can easily change mics around as needed.
I originally had the Hosa but it only had 12 patch points. the ART has 16. The Hosa has locking XLRs (locking tabs) and the ART does not so there are tradeoffs. I've also soldered my own - when I ran out of XLRs on the Hosa. I'm sure I can put together a better unit than the ART or Hosa using high-quality parts, but honestly I have not heard an audible difference. It's all pretty short length runs so either the Hosa or ART work fine for me.
Mike
I originally had the Hosa but it only had 12 patch points. the ART has 16. The Hosa has locking XLRs (locking tabs) and the ART does not so there are tradeoffs. I've also soldered my own - when I ran out of XLRs on the Hosa. I'm sure I can put together a better unit than the ART or Hosa using high-quality parts, but honestly I have not heard an audible difference. It's all pretty short length runs so either the Hosa or ART work fine for me.
Mike
- jgimbel
- carpal tunnel
- Posts: 1688
- Joined: Thu Jan 08, 2009 1:51 pm
- Location: Philadelphia, PA
- Contact:
I just made one with an 8 XLR panel with each wired to an XLR connector, which are then connected to each of my preamps, precisely so I don't have to crawl behind my rack when setting up tracks while clients are here. Works nicely!
EDIT: When I can I'm going to just get an 8 channel snake to keep things connected, to make things equally simple while stopping the need for a million mic cords stretching across the floor when recording drums, which is often.
EDIT: When I can I'm going to just get an 8 channel snake to keep things connected, to make things equally simple while stopping the need for a million mic cords stretching across the floor when recording drums, which is often.
My first new personal album in four years - pay what you want - http://jessegimbel.bandcamp.com
Aiighty, I'm gonna check for a snake & box (hey, baby, wanna come to me bedio and check out my ...) at the local used music store this week.
If none, then I'll do the rackmount thing.
Azza aside, how pitiful izzit that I bought a rack two weeks ago, and it's full?
I have no room for another, tho', in my bedio ...
If none, then I'll do the rackmount thing.
Azza aside, how pitiful izzit that I bought a rack two weeks ago, and it's full?
I have no room for another, tho', in my bedio ...
Who is online
Users browsing this forum: No registered users and 336 guests