WTB: Rack Chassis, Knobs, PM1000, Pre Projects, Goodie Bag
Moderators: TapeOpLarry, tomb
WTB: Rack Chassis, Knobs, PM1000, Pre Projects, Goodie Bag
Hey, Im looking for some 1u - 4u rack chassis
Pretty vague, but Im open to just about anything. Shoot me a reply with what youve got and lets go from there
Im also looking for some knobs...again...just your generic run of the mill knobs that go on standard pots. Im open to just about anything here too
Also looking for an entire PM1000 console, in addition to 2 PM1000 channel strips, at a reasonable price.
Also, if you have any chassis/units that can be converted into Mic Preamps, Im looking for a few units to do a project with and gain some practical expierence.
Oh, and if someone wanted to put together a goodie bag filled with good parts for an aspiring DIYer like myself, Id definitely be interested in purchasing
-Nathan
Pretty vague, but Im open to just about anything. Shoot me a reply with what youve got and lets go from there
Im also looking for some knobs...again...just your generic run of the mill knobs that go on standard pots. Im open to just about anything here too
Also looking for an entire PM1000 console, in addition to 2 PM1000 channel strips, at a reasonable price.
Also, if you have any chassis/units that can be converted into Mic Preamps, Im looking for a few units to do a project with and gain some practical expierence.
Oh, and if someone wanted to put together a goodie bag filled with good parts for an aspiring DIYer like myself, Id definitely be interested in purchasing
-Nathan
Last edited by iampoor on Sat Mar 17, 2012 3:42 am, edited 3 times in total.
-
- moves faders with mind
- Posts: 2746
- Joined: Thu Jul 03, 2003 11:26 pm
- Location: Denver, CO
- Contact:
Rack Chassis? There good (par-metal.com), and there's cheap (circuitspecialists.com).
One of the better grab bag options I've seen is this seller on ebay:
http://www.ebay.com/itm/2N4401-NPN-Tran ... 0199771068
A nice variety of parts for a very fair price. Check their other auctions for other assortments with some other designs in mind...opamps, transistors, etc.
They also have their own web site:
vakits.com
Beware some of the other assortment vendors on Ebay...some of the deals from Hong Kong and China aren't what they seem to be...resistor assortments where the stripes don't indicate the actual values, diodes with the cathode mark on the wrong end, etc...
As for knobs, I've found it very hard to beat Mouser for usable stuff that's not too pricy. Check out their knobs from Eagle Plastics.
One of the better grab bag options I've seen is this seller on ebay:
http://www.ebay.com/itm/2N4401-NPN-Tran ... 0199771068
A nice variety of parts for a very fair price. Check their other auctions for other assortments with some other designs in mind...opamps, transistors, etc.
They also have their own web site:
vakits.com
Beware some of the other assortment vendors on Ebay...some of the deals from Hong Kong and China aren't what they seem to be...resistor assortments where the stripes don't indicate the actual values, diodes with the cathode mark on the wrong end, etc...
As for knobs, I've found it very hard to beat Mouser for usable stuff that's not too pricy. Check out their knobs from Eagle Plastics.
"What fer?"
"Cat fur, to make kitten britches."
"Cat fur, to make kitten britches."
How do the Circit Specilities units compare to say, Middle Atlantic's EC series,, or just in general?The Scum wrote:Rack Chassis? There good (par-metal.com), and there's cheap (circuitspecialists.com).
One of the better grab bag options I've seen is this seller on ebay:
http://www.ebay.com/itm/2N4401-NPN-Tran ... 0199771068
A nice variety of parts for a very fair price. Check their other auctions for other assortments with some other designs in mind...opamps, transistors, etc.
They also have their own web site:
vakits.com
Beware some of the other assortment vendors on Ebay...some of the deals from Hong Kong and China aren't what they seem to be...resistor assortments where the stripes don't indicate the actual values, diodes with the cathode mark on the wrong end, etc...
As for knobs, I've found it very hard to beat Mouser for usable stuff that's not too pricy. Check out their knobs from Eagle Plastics.
Im been considering one of there kits, the problem is, I dont need alot of the parts they offer. Ive got resistors and caps coming out the toosh! :p
Thanks man, Ive been checking those out, seem to be very reasonably priced!
Not really looking for a PM700 at this moment, but if my mind changes Ill let you know (Also depends on how desperatly you want to get rid of it :p)atavacron wrote:Buy my PM700. $100. Listed in this forum.
Also, I have a bunch of bits and pieces. Feel free to holler when you're on your way.
I like the sounbd of that! Care to give me a little tiny hint of what that may/may not include so i will budget my next paycheck accordingly?
-
- suffering 'studio suck'
- Posts: 484
- Joined: Wed May 07, 2003 4:57 am
- Location: Visalia, CA
- Contact:
I started my search too late, I tried to buy it, but he already parted it out.honkyjonk wrote:You're in Reno and you didn't buy that 32 channel PM1K IN Reno that was on here for weeks and weeks? The guy couldn't give it away.
Do a search. Might still be there.
Some other guy in Reno wants to sell me a 12 channel PM1k for 1400$
Yeah Right >_<
Who is online
Users browsing this forum: No registered users and 48 guests