Toft atb issues...
-
- audio school
- Posts: 9
- Joined: Thu May 03, 2012 3:05 pm
Toft atb issues...
Im having issues with my 16ch toft console master section. A buddy of mine had the 32ch, and he had some of the same issues. He sent it back to toft, but we dont recall what the issue was... The Master section wont acknowledge at all for me. Previously it seemed to have some issue that the left out wouldn't get louder and distorts. Anyone have any experience with these? Or maybe some suggestions?
- Nick Sevilla
- on a wing and a prayer
- Posts: 5578
- Joined: Mon Mar 03, 2008 1:34 pm
- Location: Lake Arrowhead California USA
- Contact:
-
- audio school
- Posts: 9
- Joined: Thu May 03, 2012 3:05 pm
-
- tinnitus
- Posts: 1135
- Joined: Sat Jun 03, 2006 8:19 am
- Location: beautiful Carlsbad, CA
- Contact:
- Ryan Silva
- tinnitus
- Posts: 1229
- Joined: Sat Aug 07, 2004 6:46 pm
- Location: San Francisco
That happened to my v2 ATB, well something like that. All I did was work out the dust in the 'mon' knob in the master section. Been fine every since. Maybe it's a sign of something to come.
Hey Jim, any mods for these boards to quite them down?
Hey Jim, any mods for these boards to quite them down?
"Writing good songs is hard. recording is easy. "
MoreSpaceEcho
MoreSpaceEcho
-
- tinnitus
- Posts: 1135
- Joined: Sat Jun 03, 2006 8:19 am
- Location: beautiful Carlsbad, CA
- Contact:
Yes, I posted them on line a few years ago. I used different opamps, removed all the el caps, added a lot of psu bypassing etc. Got noise way down on the master (but still has a lot from those noisy inputs) and got that THD way down to .003% at +27 dbu. That eliminated the THD when hitting above +3 on the meters. A good mix the will peg the analog meters hard right while retaining far better than stock clarity.Ryan Silva wrote:Hey Jim, any mods for these boards to quite them down?
Jim Williams
Audio Upgrades
Audio Upgrades
Who is online
Users browsing this forum: No registered users and 37 guests