Hi I'm new! So I do my rough mix and do a rough master in Ozone for my bandmates (quickly sort out the EQ, make it louder etc). My bandmates say they want the vocals a little louder. I create a new mix and want to directly replace the file I already have in Ozone with the new mix but keeping all the settings. Either I'm being a total plumb or this is not obvious. Any ideas?!
Thanks!
Ozone file help
-
- audio school
- Posts: 9
- Joined: Wed Jul 22, 2015 3:27 pm
- tjcasey1
- takin' a dinner break
- Posts: 164
- Joined: Fri Dec 02, 2005 4:10 am
- Location: Boston
- Contact:
If you're using a DAW, use Ozone as an insert effect on the master buss. Then when you change the mix, your new mixdown will have the same Ozone settings on it as the old one. Don't do a stereo mixdown and then apply Ozone outside the DAW - that's too many steps.
If you do work this way (as I do), shut off Ozone when you're tracking. It's CPU heavy and can cause timing delays when recording tracks.
If you do work this way (as I do), shut off Ozone when you're tracking. It's CPU heavy and can cause timing delays when recording tracks.
Who is online
Users browsing this forum: No registered users and 186 guests