Using reverb to differentiate lead and backing vocals

Recording Techniques, People Skills, Gear, Recording Spaces, Computers, and DIY

Moderators: drumsound, tomb

Post Reply
User avatar
losthighway
deaf.
Posts: 1885
Joined: Mon Apr 14, 2008 8:02 pm
Contact:

Using reverb to differentiate lead and backing vocals

Post by losthighway » Fri Nov 08, 2019 6:56 pm

I've been thinking about this a lot when mixing lately. I've found that on a more adventurous or radical-sound type mix anything goes, one vocal in a cathedral, another bone dry. But the idea I'm musing with more is in a straight-ahead band mix. I wondered what some folks go-to approaches may be:

- Does everyone in the mix get the same reverb (i.e. plugin, or box setting, or spring, same model of a room, hall, or plate etc)?
- Does the lead get mixed dryer to be in front of some wetter backups, or ever visa versa?
- Do you shift decay times and predelay to set these apart?

I've been playing with the psychoacoustic theory that predelay can make the source sound closer because you're hearing the dry sound and then the acoustic space further away, responding after the dry sound your ear hears. It seems to approach the haas effect length of time to always work that way though. In a dense mix and/or with a quieter track it seems to be fairly similar to simply having a longer decay time.

Anyhow, that's me playing with reverb theory. Thoughts?

User avatar
vvv
zen recordist
Posts: 8679
Joined: Tue May 13, 2003 8:08 am
Location: Chi
Contact:

Re: Using reverb to differentiate lead and backing vocals

Post by vvv » Fri Nov 08, 2019 7:13 pm

To simplify, I'll use a short small plate on the lead voc, a long big plate on the backing vox.

And I do variations on that theme ...
bandcamp; vlayman;
THD; Geronimo Cowboys;
blog.
I mix with olive juice.

User avatar
A.David.MacKinnon
ghost haunting audio students
Posts: 3251
Joined: Wed May 07, 2003 5:57 am
Location: Toronto
Contact:

Re: Using reverb to differentiate lead and backing vocals

Post by A.David.MacKinnon » Sat Nov 09, 2019 9:41 pm

It's all over the place for me. Frequently there's one reverb and the lead gets a pre-delay before hitting that. Sometimes it's different versions of the same reverb with different decay times and eqs.
If the back ups are fairly tight harmonies of the lead I'll sometimes leave them dry, turn them down a little and maybe roll off some highs. This is especially true if the lead is very wet.The wash of reverb on the lead fools the brain into thinking that back ups are in the same space but keeping them dry can keep the mix tidy and makes space for the lead to be huge.

User avatar
losthighway
deaf.
Posts: 1885
Joined: Mon Apr 14, 2008 8:02 pm
Contact:

Re: Using reverb to differentiate lead and backing vocals

Post by losthighway » Sun Nov 10, 2019 6:36 am

A.David.MacKinnon wrote:
Sat Nov 09, 2019 9:41 pm
It's all over the place for me. Frequently there's one reverb and the lead gets a pre-delay before hitting that. Sometimes it's different versions of the same reverb with different decay times and eqs.
If the back ups are fairly tight harmonies of the lead I'll sometimes leave them dry, turn them down a little and maybe roll off some highs. This is especially true if the lead is very wet.The wash of reverb on the lead fools the brain into thinking that back ups are in the same space but keeping them dry can keep the mix tidy and makes space for the lead to be huge.
Nice. Yeah I feel like I hear that contrast on some records I like, this large spacious lead that's nice and loud, and then backups that are right on the edge of the speaker kind of whispering quietly. Definitely can leave more space that way.

drumsound
zen recordist
Posts: 6714
Joined: Tue Jun 01, 2004 10:30 pm
Location: Bloomington IL
Contact:

Re: Using reverb to differentiate lead and backing vocals

Post by drumsound » Mon Nov 11, 2019 6:55 am

Most times when I use reverb I spend a good amount of time getting the predelay "right." Especially reverb used for vocal. I oft concerned about intelligibility, and that is where spending time with predelay seems to be quite beneficial. I often only have one reverb for all the vocals, but vary the send amounts. It depends on how the BVs interact with the lead, but I tend to favor a bit more reverb on the harmony part(s) and less on the lead.

I've done a ton of mixes with only one reverb, so some instruments may also go to that reverb as well.

I'm mixing an acoustic record done at someone's home studio right now. I've been doing different reverbs for instruments and vocals on this one. I've used Soundtoys Little Plate on most of the vocals (with Echoboy Jr for predelay if needed) mostly in mono, and a stereo reverb for the instruments. The U-he Protoverb that John B reviewed in the magazine is doing some really great things for this. Some mixes the vocal goes to both, less to the stereo and more to the mono.

User avatar
vvv
zen recordist
Posts: 8679
Joined: Tue May 13, 2003 8:08 am
Location: Chi
Contact:

Re: Using reverb to differentiate lead and backing vocals

Post by vvv » Mon Nov 11, 2019 5:00 pm

drumsound wrote:
Mon Nov 11, 2019 6:55 am
Most times when I use reverb I spend a good amount of time getting the predelay "right." Especially reverb used for vocal.
Lately, I use patches that I created in my DAW that seem to work well together. I typically put a touch of an opto compressor between 4 and 7@1 coming down 3dB, and then go into a small, med, large or cathedral plate. I also have a kinda "Black Dog" slap vocal sound that I use in varying amounts (light to heavy), and that's it. Any chorusing is done by overdubs.

I note this because, once I started doing it, I can save a lot of time getting an acceptable mix. I'm not and will never be RTB, and I seldom mix others' stuff, so I'm interested in getting a collection of my tunes mixed and published, on my way to starting and/or finishing the next one.

I have a couple of global reverb patches I use in the final mixdown that are congruent with the above, so that I can place say, two different sets of plate-verb'd backing vocal pairs a little closer or farther away.

I am such a hack. :twisted:
bandcamp; vlayman;
THD; Geronimo Cowboys;
blog.
I mix with olive juice.

User avatar
joninc
deaf.
Posts: 1864
Joined: Mon Jun 09, 2003 5:02 pm
Location: canada
Contact:

Re: Using reverb to differentiate lead and backing vocals

Post by joninc » Mon Nov 11, 2019 6:18 pm

- Does everyone in the mix get the same reverb (i.e. plugin, or box setting, or spring, same model of a room, hall, or plate etc)?

nope. unless the goal is to have it sound choral and all meshed together as one large ensemble - otherwise treat differently to create contrast and separation

- Does the lead get mixed dryer to be in front of some wetter backups, or ever visa versa?

Sometimes - really depends on the song....

- Do you shift decay times and predelay to set these apart?

I always play with the predelay on any vocal verb....

Lately I like playing with things a bit drier overall and a few well placed reverb moments - emphasizing a certain lyric or pause in the arrangement by having that line get wetter or drier to create some drama.

ps - transatlantic plate is the best plate plugin I've ever used - but i also love valhalla vintage verb and room (plate was just meh to me) and soundtoys little plate too
the new rules : there are no rules

User avatar
losthighway
deaf.
Posts: 1885
Joined: Mon Apr 14, 2008 8:02 pm
Contact:

Re: Using reverb to differentiate lead and backing vocals

Post by losthighway » Mon Nov 11, 2019 6:44 pm

Thanks for sharing buddies- the longer I do this, the more interested I am in the minutiae of application, strategy and technique, and the less I'm curious about 'what mic' or 'what pre'.

I'm noticing that I share a preference with a lot of you for plate reverb sounds on vocals. I've really only been using rooms as a 10- 40% wet thing following a delay slap to just kind of diffuse it a little bit. Something about those plate sounds eases into a mix much easier.

Post Reply

Who is online

Users browsing this forum: No registered users and 16 guests