Available kits for DIY assembly
- ghaines
- alignin' 24-trk
- Posts: 68
- Joined: Sun Nov 30, 2003 11:44 am
- Location: Pittsburgh, PA
- Contact:
This one shot thing is so cool. I've always wanted your DIs out on the floor vs in the rack. Plus you can take the pre amps to ribbon mics... this is so cool.
Senior Contributor, Tape Op
Chief Mastering Engineer, Treelady Studios - Pittsburgh, PA
www.treelady.com Treelady Mastering, Pittsburgh, PA
Chief Mastering Engineer, Treelady Studios - Pittsburgh, PA
www.treelady.com Treelady Mastering, Pittsburgh, PA
-
- gettin' sounds
- Posts: 103
- Joined: Wed May 07, 2003 8:18 pm
- Location: Oakland, CA
- Contact:
Seventh Circle Audio - CH02 Chassis Now Shipping
New and improved CH02 chassis kits are now shipping! Just some of the many improvements include:
- New power supply, PS04, mounted on right side of chassis.
- Fuse easily accessible on back panel.
- Illuminated logo indicates power supply health on front panel.
- Power switch wiring is simpler, low-voltage, and DC.
- Front sub-panels have counter-bored screw holes for a cleaner look.
- Closer part tolerances for easier assembly.
For those who don't know, the CH02 is a road-worthy 2RU chassis designed to hold up to eight Seventh Circle modules in any combination. Standard features include:
- High voltage supply rails can offer almost double the headroom of a standard 500-series rack.
- Rugged, heavy gauge cold rolled steel for superior durability and shielding from external magnetic fields.
- Super-strong 3/16" aluminum front panels with black anodized finish and white laser engraving.
- Clear chromate plating for excellent grounding.
- Eight internal dividers to support heavy modules.
- Split rear flange for easy module installation.
- Power supply compatible with any mains voltage world-wide.
- Incredible value
- Designed and built in USA
-
- gettin' sounds
- Posts: 103
- Joined: Wed May 07, 2003 8:18 pm
- Location: Oakland, CA
- Contact:
Sound Skulptor CP5176 - FET Compressor in 500 series format
Sound Skulptor CP5176 - FET Compressor in 500 series format
The CP5176 is a FET compressor based on the design that was originally used in the 1176 compressor, which has been adapted to the '500' format of API*.
The CP5176 is a FET compressor based on the design that was originally used in the 1176 compressor, which has been adapted to the '500' format of API*.
- 500 series format,
Original Cinemag transformers on input and output,
All discrete, class A audio path,
DOA based, API* 2520 compatible, output stage,
5 ratios + SLAM mode (all buttons mode),
Optional High pass filter in the side chain,
Distorsion mode adds 3% of second harmonic, close to Rev A,
Stereo linkable,
High resolution gain reduction meter,
Available assembled or as a full kit.
Last edited by JPK on Mon Apr 13, 2015 7:45 am, edited 2 times in total.
Sound Skulptor 501 - Single 500 Series Host
Sound Skulptor 501 - Single 500 Series Host
The 501 is a single slot, 500 series compatible case with power supply.
The 501 is a single slot, 500 series compatible case with power supply.
- Delivers +16V and -16V rails and 48V phantom,
Auxiliary jack socket can be connected to any I/O signal such as compressors stereo link,
Several 501's can be stacked to create a custom lunchbox,
Very low noise power supply,
Works from any 12 Volts DC power source, including a battery,
comes with a 12V power adapter,
Gold plated Neutrik connectors,
Double DC plug allows daisy chaining several 501,
Sound Skulptor MP566 Tube Preamplifier for the 500 series
Sound Skulptor MP566 Tube Preamplifier for the 500 series
The MP566 is a dual-triode vacuum tube circuit preamplifier based on a design that has been used in several famous devices from the 50's, which has been adapted to the '500' format of API*.
With its fully powered triodes and its two transformers, the MP566 brings the most fulfilling warmth and color to your Lunchbox.
The MP566 is a dual-triode vacuum tube circuit preamplifier based on a design that has been used in several famous devices from the 50's, which has been adapted to the '500' format of API*.
With its fully powered triodes and its two transformers, the MP566 brings the most fulfilling warmth and color to your Lunchbox.
- - Dual triode design,
- Input and output transformers,
- High 68dB gain will please the most demanding ribbon mics,
- Variable input and output levels for total control over tube saturation,
- 2 different negative feedback levels (Mid/High Gain) for sweet or more aggressive sound,
- Input pad (Low Gain) for hot mics or line levels,
- Full 225 Volts tube supply and full 150mA tube heater,
- 1/4" DI jack, high impedance input for instruments or line,
- Total current draw less than 160 mA,
- Available assembled or as a full kit (everything included).
- Zeppelin Design Labs
- audio school graduate
- Posts: 10
- Joined: Wed Nov 04, 2015 10:45 am
- Location: Chicago, Illinois USA
- Contact:
DIY Guitar Amps, Contact Mic
Percolator 2W Tube Amp DIY Kit
http://zeppelindesignlabs.com/product/p ... w-amp-kit/
Built around a single 6AF11 NOS tube. Available with or without cabinet enclosure.
Percolator 2W 1x8 Combo Tube Amp DIY Kit
http://zeppelindesignlabs.com/product/p ... -finished/
Cortado Buffered Balanced Piezo Contact Microphone DIY Kit
http://zeppelindesignlabs.com/product/c ... ntact-mic/
Includes a little PCB for making your own preamp to balance the signal and match the impedance of the piezo disc output to your recorder's input. Requires phantom power.
http://zeppelindesignlabs.com/product/p ... w-amp-kit/
Built around a single 6AF11 NOS tube. Available with or without cabinet enclosure.
Percolator 2W 1x8 Combo Tube Amp DIY Kit
http://zeppelindesignlabs.com/product/p ... -finished/
Cortado Buffered Balanced Piezo Contact Microphone DIY Kit
http://zeppelindesignlabs.com/product/c ... ntact-mic/
Includes a little PCB for making your own preamp to balance the signal and match the impedance of the piezo disc output to your recorder's input. Requires phantom power.
Who is online
Users browsing this forum: No registered users and 26 guests