cheap ART wordclock
-
- steve albini likes it
- Posts: 365
- Joined: Sat May 22, 2004 8:08 pm
- Location: little rock, arkansas
- Contact:
cheap ART wordclock
im running a motu 828mkII, and an 828MKI
should i go for it?
that cheap art wordclock sold out in its first day at zzsound, and my friend says it did wonders for his sound. hes running a 24i/o.
will it work with the spdf on the mark 1?
my heart tells me shut up, and buy it already...
thanks,
should i go for it?
that cheap art wordclock sold out in its first day at zzsound, and my friend says it did wonders for his sound. hes running a 24i/o.
will it work with the spdf on the mark 1?
my heart tells me shut up, and buy it already...
thanks,
-
- tinnitus
- Posts: 1094
- Joined: Fri Oct 20, 2006 7:52 am
- Location: Washington, DC
I've read in many places that usually using anything but the poorest of internal clocks will have less jitter than using an external clock. That doesn't mean an external clock won't improve your sound, and I have wondered lately if some kinds of jitter actually sound good (if that makes any sense).
For myself, I'm considering buying it from Guitar Center or Sweetwater, taking it home and doing some A/B tests, and then returning it if it doesn't sound better with it in place. I kinda figure that's a good way to go with any uncertain product that you can get from a retailer with a decent return policy.
Todd Wilcox
For myself, I'm considering buying it from Guitar Center or Sweetwater, taking it home and doing some A/B tests, and then returning it if it doesn't sound better with it in place. I kinda figure that's a good way to go with any uncertain product that you can get from a retailer with a decent return policy.
Todd Wilcox
-
- suffering 'studio suck'
- Posts: 479
- Joined: Tue Apr 22, 2008 4:52 pm
Re: cheap ART wordclock
+1 to the notion that unless the clocks in the 828s are really terrible it has more potential to make the sound worse than it does to make the sound better. It does however have serious placebo potential, and looks kinda cool.
I had the opportunity to pick one of these up at a big discount, so went ahead and gave it a shot.
I did some comparison tests, one take clocking internally and one externally, and my first impression is that the ART made little if any difference to overall sound quality. It seemed like maybe the highend was a little more focused, but ever so slightly.
This was with a Delta 1010 recording acoustic guitar and voice, so not to say on someone else's system the difference wouldn't be greater.
I did some comparison tests, one take clocking internally and one externally, and my first impression is that the ART made little if any difference to overall sound quality. It seemed like maybe the highend was a little more focused, but ever so slightly.
This was with a Delta 1010 recording acoustic guitar and voice, so not to say on someone else's system the difference wouldn't be greater.
- @?,*???&?
- on a wing and a prayer
- Posts: 5804
- Joined: Wed May 07, 2003 4:36 pm
- Location: Just left on the FM dial
- Contact:
And that is what a good word clock can do. In my ear training class, I have similar experience with students. Some hear it, some don't. The fact that you can or can't will certainly dictate how you proceed with your work.palinilap wrote:I had the opportunity to pick one of these up at a big discount, so went ahead and gave it a shot.
I did some comparison tests, one take clocking internally and one externally, and my first impression is that the ART made little if any difference to overall sound quality. It seemed like maybe the highend was a little more focused, but ever so slightly.
This was with a Delta 1010 recording acoustic guitar and voice, so not to say on someone else's system the difference wouldn't be greater.
When you come to realize that 7 to 8 db of signal can be gained through having good word clock, then you'll start having more open sounding recordings. Stereo image gets better too. No matter how subtle, every subtly can accrue and equate to open-ness in the end. Sounds totally worth it to me and I haven't even heard this thing yet.
-
- zen recordist
- Posts: 8876
- Joined: Mon May 19, 2003 12:10 pm
- Location: NYC/Brooklyn
- Contact:
but is there some sort of quantitative comparison between this and other available units? every product out there has Jitter-Gard? or Stabilitrol? or some other meaningless marketing title.
i have trouble believing that plugging a $150 ARTcessory into my RME Fireface 800 is going to make a positive difference, but maybe i'm missing something....
i'm assuming there's some kind of reason why some clocks cost $8K and this one costs $150?
i have trouble believing that plugging a $150 ARTcessory into my RME Fireface 800 is going to make a positive difference, but maybe i'm missing something....
i'm assuming there's some kind of reason why some clocks cost $8K and this one costs $150?
"I try to hate all my gear equally at all times to keep the balance of power in my favor." - Brad Sucks
-
- steve albini likes it
- Posts: 326
- Joined: Tue Nov 02, 2004 2:11 pm
- Location: Brooklyn NY
- Contact:
I think my expectations were a little high after hearing comparisons like Black Lion's. I intend to do more testing with, perhaps, more objective ears.@?,*???&? wrote:And that is what a good word clock can do. In my ear training class, I have similar experience with students. Some hear it, some don't. The fact that you can or can't will certainly dictate how you proceed with your work.palinilap wrote:I had the opportunity to pick one of these up at a big discount, so went ahead and gave it a shot.
I did some comparison tests, one take clocking internally and one externally, and my first impression is that the ART made little if any difference to overall sound quality. It seemed like maybe the highend was a little more focused, but ever so slightly.
This was with a Delta 1010 recording acoustic guitar and voice, so not to say on someone else's system the difference wouldn't be greater.
When you come to realize that 7 to 8 db of signal can be gained through having good word clock, then you'll start having more open sounding recordings. Stereo image gets better too. No matter how subtle, every subtly can accrue and equate to open-ness in the end. Sounds totally worth it to me and I haven't even heard this thing yet.
I should also point out that my co-worker purchased the same unit, clocked his Tascam FW410 to it, and supposedly heard an improvement in lowend clarity and stereo imaging.
-
- tinnitus
- Posts: 1094
- Joined: Fri Oct 20, 2006 7:52 am
- Location: Washington, DC
Again, a lot of experts seem to agree that if your internal clock is halfway decent then you will have the least jitter (quantitative comparison) using the internal clock. Whether things will sound (qualitative comparison) best on your internal clock is a whole nother issue. Of course the normal assumption is that less jitter means better sound.Smitty wrote:but is there some sort of quantitative comparison between this and other available units? every product out there has Jitter-Gard? or Stabilitrol? or some other meaningless marketing title.
i have trouble believing that plugging a $150 ARTcessory into my RME Fireface 800 is going to make a positive difference, but maybe i'm missing something....
i'm assuming there's some kind of reason why some clocks cost $8K and this one costs $150?
In terms of pluggin the ART clock into your Fireface, see the preceding paragraph. :)
Trying to figure out how almost any product is priced is not easy. How much is a painting worth? How much is a diamond worth? In the world of audio, there is a mixture of technology and art, and while the technology can be very expensive to very cheap, almost any price can be placed on art.
Todd Wilcox
-
- steve albini likes it
- Posts: 365
- Joined: Sat May 22, 2004 8:08 pm
- Location: little rock, arkansas
- Contact:
-
- suffering 'studio suck'
- Posts: 479
- Joined: Tue Apr 22, 2008 4:52 pm
- @?,*???&?
- on a wing and a prayer
- Posts: 5804
- Joined: Wed May 07, 2003 4:36 pm
- Location: Just left on the FM dial
- Contact:
You guys are completely missing the point of this box-
It's not just to swap out and use a different clock than what your DAW already has- it may or may not be better for that application.
It's to give you an external device you can feed to multiple devices- something all low-end consumer DAW stuff couldn't do up to this point.
That's why this thing is imperative. Even if the clock blows (unlikely), you now have the ability to route it to multiple units to stabilize and synchronize them to the same pulse (term used loosely here).
It's not just to swap out and use a different clock than what your DAW already has- it may or may not be better for that application.
It's to give you an external device you can feed to multiple devices- something all low-end consumer DAW stuff couldn't do up to this point.
That's why this thing is imperative. Even if the clock blows (unlikely), you now have the ability to route it to multiple units to stabilize and synchronize them to the same pulse (term used loosely here).
Actually, I believe Cosmo Matassa said in Tape Op that with digital recording, it's ALL about the clock. Dan Lavry swears up and down that external clocking is bad bad bad, unless you're using it to sync multiple devices. I had the Black Lion Microclock for a while, but it was not at all friendly with my MOTU, so I got rid of it. I haven't noticed a drastic drop in quality. Who knows?
Why does a Drawmer pre-amp cost 2500, but an ART costs 300? Because the Drawmer is better made and sounds way better. Why does a Mercedes cost four times as much as a Ford Escort? Because the Mercedes is a better car in every way. But they're both cars right?
Why does a Drawmer pre-amp cost 2500, but an ART costs 300? Because the Drawmer is better made and sounds way better. Why does a Mercedes cost four times as much as a Ford Escort? Because the Mercedes is a better car in every way. But they're both cars right?
Leviethan
Who is online
Users browsing this forum: No registered users and 28 guests