electrical engineering education/knowledge
-
- re-cappin' neve
- Posts: 659
- Joined: Thu Oct 09, 2003 3:55 pm
- Location: philly
- Contact:
electrical engineering education/knowledge
so i really wish i had more electrical engineering knowledge - especially in regards to being a recording engineer and all. i took a few classes in college (20 yrs ago), and learned little at the time. i have no concern regarding obtaining a degree, but just want the knowledge. i have tinkered with the idea of enrolling in some online university or other to just have a structure, but maybe that's a big waste of $s and I should just get some books, kits and watch some youtube videos or pay for something like lynda.com or some equivalent?
i can make my own cables, but that's about it. never tried a proper kit - capi, hairball audio, etc, though would ideally like to troubleshoot and know what i'm actually doing any why. would be nice to fix things as well.
anyone else been thinking about this or gone down this path?
i can make my own cables, but that's about it. never tried a proper kit - capi, hairball audio, etc, though would ideally like to troubleshoot and know what i'm actually doing any why. would be nice to fix things as well.
anyone else been thinking about this or gone down this path?
Re: electrical engineering education/knowledge
Yes. I actually bought a book last year of the 'zon, which book is OK as a reference but doesn't hold my interest to study.
I'm a kind of information pack rat and save schematics of equipment I both own, and would like to. And sometimes of technical writing (ex., the Rane notes, various treatises on tube amps, FX pedals, etc.)
When something breaks I can so far usually troubleshoot and fix it, but I have to research what I'm doing per the piece, and the issue.
I can solder, I'm pretty good with my hands (she said ) and I lke doing it (my bro is a pretty gifted mechanic, hates and even fears electrical).
I do wish I were more motivated and found it easier to get the practical theory stuff down. I wish I could sight-read a schematic.
I have a Brutalist pedal kit awaiting me to build, also, if ever I find the time.
I'm a kind of information pack rat and save schematics of equipment I both own, and would like to. And sometimes of technical writing (ex., the Rane notes, various treatises on tube amps, FX pedals, etc.)
When something breaks I can so far usually troubleshoot and fix it, but I have to research what I'm doing per the piece, and the issue.
I can solder, I'm pretty good with my hands (she said ) and I lke doing it (my bro is a pretty gifted mechanic, hates and even fears electrical).
I do wish I were more motivated and found it easier to get the practical theory stuff down. I wish I could sight-read a schematic.
I have a Brutalist pedal kit awaiting me to build, also, if ever I find the time.
- markjazzbassist
- tinnitus
- Posts: 1050
- Joined: Mon Apr 25, 2011 11:33 am
- Location: Cleveland
Re: electrical engineering education/knowledge
have you looked into a local community college or trade school? they usually have cheap classes, that's the route i was gonna take when i got some more time.
- ulriggribbons
- steve albini likes it
- Posts: 398
- Joined: Sun Oct 26, 2003 7:50 pm
- Location: Seattle, WA
Re: electrical engineering education/knowledge
If you want audio electronics knowledge, school for electronics is not gonna get you there.
I would recommend groupdiy.com. There is a Meta Meta thread there that covers everything you would want to know about audio electronics, from which end of the soldering iron to hold, to how to build a neve console.
It’s a lot of reading, but there is collective wisdom for more than a decade there
$.02
I would recommend groupdiy.com. There is a Meta Meta thread there that covers everything you would want to know about audio electronics, from which end of the soldering iron to hold, to how to build a neve console.
It’s a lot of reading, but there is collective wisdom for more than a decade there
$.02
- Scodiddly
- speech impediment
- Posts: 4012
- Joined: Wed Dec 10, 2003 6:38 am
- Location: Mundelein, IL, USA
- Contact:
Re: electrical engineering education/knowledge
I've got a couple of electronics text books I found in a used book store, old military training manuals. Very solid fundamentals, though I'm not sure you'll need the radar electronics chapters in the second book. Ask nice and maybe pay for shipping and they're yours.
Re: electrical engineering education/knowledge
I took some EE classes at the local community college a few years ago. It was of value, but IME perusing Groupdiy and some of the pedal building sites will get you into directly applicable theory and lead to a more holistic type of learning. Read, read, read, and stare at schematics.
Not that I'm any sort of expert.
Not that I'm any sort of expert.
Village Idiot.
-
- suffering 'studio suck'
- Posts: 434
- Joined: Wed Apr 15, 2009 9:43 am
- Location: saint paul, mn
Re: electrical engineering education/knowledge
I took an electronics class at a local trade school a few years ago. It was expensive and I'm not sure it was worth it from a financial perspective. It did give me an excellent understanding of the fundamentals, much more than the sporadic independent studying I was trying to do before. I think if you are highly self motivated you can spend a few bucks on old text books and learn a lot on your own, I just personally found that difficult.
I don't really like trying to get this sort of information online, just because there's so much junk to sort through, incorrect information, unclear explanations, etc. I'd stick to actual books for learning the basics. But it's true there is a wealth of knowledge on GroupDIY and other similar sites.
I don't really like trying to get this sort of information online, just because there's so much junk to sort through, incorrect information, unclear explanations, etc. I'd stick to actual books for learning the basics. But it's true there is a wealth of knowledge on GroupDIY and other similar sites.
-
- suffering 'studio suck'
- Posts: 444
- Joined: Mon Apr 16, 2012 11:21 pm
Re: electrical engineering education/knowledge
A college room mate of mine had this book, it's pretty neat:
https://www.amazon.com/Electronic-Proje ... dpSrc=srch
https://www.amazon.com/Electronic-Proje ... dpSrc=srch
- ubertar
- ears didn't survive the freeze
- Posts: 3775
- Joined: Wed Feb 18, 2004 7:20 pm
- Location: mid-Atlantic US
- Contact:
Re: electrical engineering education/knowledge
Last time I checked (it's been many years) the NEETS guide was free online. It's the electronics training manual for the Navy, or it was at one time. Good stuff.
Practical Electronics for Inventors is a good book, and the Forrest Mims stuff is fun, too.
Practical Electronics for Inventors is a good book, and the Forrest Mims stuff is fun, too.
- ubertar
- ears didn't survive the freeze
- Posts: 3775
- Joined: Wed Feb 18, 2004 7:20 pm
- Location: mid-Atlantic US
- Contact:
Re: electrical engineering education/knowledge
Unless that's been updated I'd steer clear, only because it's outdated and a lot of the parts might not be available anymore.Magnetic Services wrote: ↑Wed Mar 14, 2018 8:53 amA college room mate of mine had this book, it's pretty neat:
https://www.amazon.com/Electronic-Proje ... dpSrc=srch
-
- suffering 'studio suck'
- Posts: 444
- Joined: Mon Apr 16, 2012 11:21 pm
Re: electrical engineering education/knowledge
True, it is pretty old school. And no included parts :/ubertar wrote: ↑Wed Mar 14, 2018 5:10 pmUnless that's been updated I'd steer clear, only because it's outdated and a lot of the parts might not be available anymore.Magnetic Services wrote: ↑Wed Mar 14, 2018 8:53 amA college room mate of mine had this book, it's pretty neat:
https://www.amazon.com/Electronic-Proje ... dpSrc=srch
Re: electrical engineering education/knowledge
I second this.ubertar wrote: ↑Wed Mar 14, 2018 5:10 pmUnless that's been updated I'd steer clear, only because it's outdated and a lot of the parts might not be available anymore.Magnetic Services wrote: ↑Wed Mar 14, 2018 8:53 amA college room mate of mine had this book, it's pretty neat:
https://www.amazon.com/Electronic-Proje ... dpSrc=srch
Though I still see some of the kits for sale on Paia’s website. At a glance however, it is not easy to tell if Paia still remains in business.
- suppositron
- suffering 'studio suck'
- Posts: 456
- Joined: Fri Feb 22, 2008 6:59 am
- Location: Minnesota
- Contact:
Re: electrical engineering education/knowledge
I'm not sure I agree with this. Curriculums vary but I got a tech degree and a fair amount of time was spent on analog electronics that directly translated into audio gear. There were subjects within I wished we would have gone more in depth on but we learned a lot.
That being said it was EXPENSIVE and there are a lot of resources out there like everyone else is mentioning.
MoreSpaceEcho wrote:c'mon. everyone knows that roland really starts to sing when you push the master up.
Re: electrical engineering education/knowledge
Yes this is a link to something I posted on another forum, but it is pretty darn good if I do say so myself:
Everything Useful is a Voltage Divider
It was one of the brightest guys on the DIYStompboxes forum where I first heard that term. It took me a while to really get my head around it, and it still takes me a while sometimes to see the dividers in a given schematic. It's almost universally true, though, when we're talking about audio electronics.
Everything Useful is a Voltage Divider
It was one of the brightest guys on the DIYStompboxes forum where I first heard that term. It took me a while to really get my head around it, and it still takes me a while sometimes to see the dividers in a given schematic. It's almost universally true, though, when we're talking about audio electronics.
-
- audio school graduate
- Posts: 14
- Joined: Tue Oct 19, 2010 4:47 pm
Re: electrical engineering education/knowledge
I should chime in as one who holds an actual BSEE degree...
the foundations of engineering do not begin on forums and building pedals / preamp kits.
that's all practical knowledge - which is certainly worthwhile - but if you're really serious... begin with calculus and physics. lots of both.
-pete
the foundations of engineering do not begin on forums and building pedals / preamp kits.
that's all practical knowledge - which is certainly worthwhile - but if you're really serious... begin with calculus and physics. lots of both.
-pete
Who is online
Users browsing this forum: No registered users and 30 guests